GOLFMK8
GOLFMK7
GOLFMK6
GOLFMKV

JB1 rev 1 and CW Catless Downpipe, Audi wheels for sale

MonkadelicD

New member
Location
North Texas
Reduced prices! Need to get this stuff out my storage!
I reluctantly traded in my 2016 GTI to get a lower payment so I've got some parts sitting in storage. Can pick up in Denton, TX or anywhere within 30 miles. I will ship the JB1.

$75 - Circuit Werks catless downpipe - will ship at buyer's expense.
I know these get some flak for being cheap and having fitment issues. I had mine installed from 5k miles to 56k miles. I never had any leaks or any other issues. I installed it myself and made sure that everything was tight and adjusted. Its easy to get on and off. I removed it every time I brought the car to the dealership for service.

$200 ($215 shipped) - Burger Motorsports JB1 rev 1. with data cable and long usb
This was on my car for 50k miles. Never had an issue. Some of the plastic wire guard got brittle and cracked up but all the wires are good. It is running map 6 with a slightly reduced boost level to keep from slipping the clutch. I think it was set at 3.5 at around 2500-3000 and ramping up to 5 at 5500.

$275 - Audi 5-spoke C6 A6 wheels (8.0 Jx18 ET43) mfg no.: 8E0601025AK
These wheels get perfect near flush look and fit 235 -245 tires. There are 2x 235/40ZR18 Hankook Ventus V12 Evo2 tires with only 1000 miles. The other two have 235/40ZR18 Continental ExtremeContact D/W that need to be replaced. The wheels have some curb rashing and have a dark grey plasti-dip that kinda closely matches the Carbon Steel Metallic. They need to be refinished to look good.
 

Attachments

  • CW-catless-downpipe-1.jpg
    CW-catless-downpipe-1.jpg
    721.5 KB · Views: 426
  • CW-catless-downpipe-2.jpg
    CW-catless-downpipe-2.jpg
    703.2 KB · Views: 419
  • JB1-rev1.jpg
    JB1-rev1.jpg
    701.2 KB · Views: 402
  • Audi-wheels.jpg
    Audi-wheels.jpg
    370.4 KB · Views: 404
  • Wheel-size.jpg
    Wheel-size.jpg
    339.1 KB · Views: 405
  • tires.jpg
    tires.jpg
    454.7 KB · Views: 397
  • hankook-2.jpg
    hankook-2.jpg
    299.8 KB · Views: 402
  • Hankook-1.jpg
    Hankook-1.jpg
    343.7 KB · Views: 397
  • hankook-tread-1.jpg
    hankook-tread-1.jpg
    267.1 KB · Views: 404
  • hankook-tread-2.jpg
    hankook-tread-2.jpg
    267.3 KB · Views: 401
Last edited:

RecycledDonuts

Ready to race!
Location
Alabama
Info on JB1 please. What map 6 was in terms of hp/tq? May be interested
 

MonkadelicD

New member
Location
North Texas
I never got the car to a dyno because at 5.5lbs of boost at 3-4.5k RPM the clutch started slipping. I dropped it down to a max of 3.5lbs at 3k RPM and didn't have slip unless I used lots of throttle in 6th gear on the highway.

I had a downpipe as well and I'm thinking that at 5.5lbs settings on the JB1 I was probably ~350tq and ~320hp. That's based on what other people were able to attain with those settings. You can search for the JB1 threads and see what people are getting. Lots of people have posted their results online. It definitely added some speed to the car. Acceleration barely slows down all the way up to 125mph cutoff.
 

RecycledDonuts

Ready to race!
Location
Alabama
Let me check something and get back with you. I am interested in the JB1
 
Top