Proski’s 6MT DBV2 Turbo Build

Hi guys,

I decided on making a build thread for my 2017 GTI Sport as I’ve added a ton of mods since purchase and this would be a good way to keep track of everything as well as give some feedback on products, etc. I will update the thread with new build progress and some miscellaneous photos of meets/adventures.

Feel free to ask any questions!

Mod List:

Engine and Transmission:
DBV2 V2 TBB hybrid turbo
PR MPI w/1300 cc injectors
AN 6 fuel lines
PM4 fuel controller
4 bar map sensor and 5 bar AEM off manifold
A2B 5 bar harness
Fluidamp
BFI Stage 1 motor and trans mounts
IE Intercooler
CTS 3.5in catless downpipe paired w/ Remus catback
APR intake w/ turbo inlet pipe and inlet elbow
VWR dog bone mount
APR boost tap
P3 boost gauge w/analog boost sensor
Sachs 4 puck racing clutch
Billet rear main seal
IE shifter bracket and bushings
ECS braided clutch line
Bleeder block mod


Wheels and Suspension:
VWR springs
034 front and rear strut mounts
034 front strut bearings
Neuspeed rse10 in satin bronze 18x8.5 et45 w/ Firehawk Indy 500s 245/40/18
Fender screw mod
Tyrolsport dead set subframe kit
Motorsport hardware stud conversion kit
Alzor Audi Rotor reps 18x8 w/ Bridgestone Blizzak WS80 ( winter setup)
Konig hypergrams 17x8 w/ Hoosier DR2 245/45/17

Exterior and Miscellaneous:
MK7.5 OEM Euro Taillights (JBale harness)
Deautoled led license plate lights
OEM roof racks w/Thule ski attachments
Weather tech guards
Weather tech trunk liner
Rally Armour mud flaps
US Millworks front plate mount
Leyomotorsport billet radio knob set
BlackVue 650s 2CH dashcam
Various OBD11 mods
OEM China powerfolding mirrors
Auto headlight sensor and euro headlight switch

Purchased but not installed:

Aerofabb rear spoiler extension
OEM jackpad adapter kit
Fog light retro fit kit (sources individually)

Future Mods:
Aerofabb front spoiler



Definitely missing a few things but I’ll add them as they come to mind..


Sent from my iPhone using Tapatalk


Sent from my iPhone using Tapatalk

Some photos

Polish Day Parade 2018




Spring come sooner!



Sent from my iPhone using Tapatalk

[reserveddd]


Sent from my iPhone using Tapatalk

where in bk are you? I feel like I've seen this car

navindralr said:

where in bk are you? I feel like I've seen this car

Click to expand...

Brooklyn Heights/Dumbo


Sent from my iPhone using Tapatalk

Proski said:

Brooklyn Heights/Dumbo


Sent from my iPhone using Tapatalk

Click to expand...

oh, I'm close. I'm in willyb, but always in that area.

Nice to see another local MK7, love the build, especially the DBV2 coming up. One note of caution is the 034 front mounts. Have you considered coils with camber plate mounts?

You need to ditch the jb4 and go with a real tune/tuner. So much potential out of the v2 but you’re wasting it without flex mpi, lpfp, and tune

carchrism5 said:

Nice to see another local MK7, love the build, especially the DBV2 coming up. One note of caution is the 034 front mounts. Have you considered coils with camber plate mounts?

Click to expand...

I’ve consisted BC Racing coils and will probably end up going that route in the coming months. For now, I’ll probably just go ahead and install them. Maybe I’ll get lucky without any creaks or knocks [emoji23]


Sent from my iPhone using Tapatalk

Triton said:

You need to ditch the jb4 and go with a real tune/tuner. So much potential out of the v2 but you’re wasting it without flex mpi, lpfp, and tune

Click to expand...

The DBV2 is going to be at my shop tomorrow. Once it’s installed; going to be UM tuned and the jb4 will be sold so if anyone wants dips


Sent from my iPhone using Tapatalk

Proski said:

I’ve consisted BC Racing coils and will probably end up going that route in the coming months. For now, I’ll probably just go ahead and install them. Maybe I’ll get lucky without any creaks or knocks [emoji23]


Sent from my iPhone using Tapatalk

Click to expand...

Forget creaks and clunks, you better hope they don't snap your strut rods. They provide zero benefit over stock mounts up front and riddled with problems. Look at Navi's build thread. Same thing happened to me, twice.

is that turbo in and installed? I want to see this thing!!!

carchrism5 said:

Forget creaks and clunks, you better hope they don't snap your strut rods. They provide zero benefit over stock mounts up front and riddled with problems. Look at Navi's build thread. Same thing happened to me, twice.

Click to expand...

Thanks for the heads up! I’m going to take a peak


Sent from my iPhone using Tapatalk

navindralr said:

is that turbo in and installed? I want to see this thing!!!

Click to expand...

Not yet [emoji17] Had some scheduling issues with the shop because of my own fault/work and now with my luck, Jeff @ UM is going to Wookies the week I wanted to schedule it so we’re delayed by a about two weeks [emoji2959]


Sent from my iPhone using Tapatalk

Anyone know some more info about the Pagparts brushless fuel pump upgrade? Seems like a nice drop-in kit !


Sent from my iPhone using Tapatalk