southpawboston
Drag Racing Champion
- Location
- Somerville, MA
I've had a lot of fun making these-- I've made and sold 84 in total to you guys!
I am making the 3d file publicly available and will be posting it to thingiverse. In the meantime, you can download it from my google drive. The file is the 8th and most recent revision. The first couple of batches had some issues with "clicking" properly into place without some minor filing but the latest version is as good as OEM.
Here's how to make the holder:
Step 1: Download and print the stl file. If you don't have access to a printer, you can get prints done online. I recommend ABS plastic but ASA works well also. Print with 100 micron layer height if possible for a smoother finish.
Step 2: Sand and spray paint the holder (optional but recommended)
Step 3: Buy the port on Aliexpress or eBay. Discard the two shell halves and all but one pin. Insert one pin in any position and epoxy the port to the rear of the holder. (One pin holds the OBDeleven perfectly. More pins will make it too hard to pull out).
Enjoy!
I am making the 3d file publicly available and will be posting it to thingiverse. In the meantime, you can download it from my google drive. The file is the 8th and most recent revision. The first couple of batches had some issues with "clicking" properly into place without some minor filing but the latest version is as good as OEM.
Here's how to make the holder:
Step 1: Download and print the stl file. If you don't have access to a printer, you can get prints done online. I recommend ABS plastic but ASA works well also. Print with 100 micron layer height if possible for a smoother finish.
Step 2: Sand and spray paint the holder (optional but recommended)
Step 3: Buy the port on Aliexpress or eBay. Discard the two shell halves and all but one pin. Insert one pin in any position and epoxy the port to the rear of the holder. (One pin holds the OBDeleven perfectly. More pins will make it too hard to pull out).
Enjoy!