7
WTT Rotiform las-r
- Thread starter jewnbug
- Start date
MosFed
New member
- Location
- East Coast
- Car(s)
- Mk7 R > 600whp
Location? Offset?
I'm in frisco tx area offset is 45mm 5×114.3/5x112 I can ship as well.
Sent from my ONEPLUS A6013 using Tapatalk
Last edited:
Frank Reynolds
Go Kart Newbie
- Location
- So Cal
Ahhhh my former residence... well, Little Elm. 5x114.3 is a PCD commonly found on Japanese cars. The offset is likely et45 GLWS
They fit on my mk7 lol... But regardless the offset is both 5x114.3/5x112 can fit both sizes
Sent from my ONEPLUS A6013 using Tapatalk
Last edited:
Those are bolt circle specs, people are asking for offset, which is totally separate. It should be something like +45 and be with the bolt circle info on the wheel specs. It describes the distance from the wheel center to the inside bolting face; tells you how much the wheel will poke out or tuck in.
Frank Reynolds
Go Kart Newbie
- Location
- So Cal
From the Rotiform site:
SIZE BP BP 2 PART NUMBER FINISH BORE OFFSET BSM (IN) CAP NUM RATING (LB) WEIGHT (LB) LUG TYPE LIPSIZE (IN)
19X8.50 5X112 5X114.3 R142198507+45 BD-MATTE BLK 72.60 45 6.500 33411-15BD 1600 29 BALL 0