What did you do to your mk7 today?

[swcrow]

Washed, clay bar’d and sonax ceramic spray coated

And loaded E30 v3 tune to test out

 

[Giuseppe Busso]

ella re kanis malakies stis aftokinito sou pou menis stin Ellada

Tou gamisa ta rammata

I live in Piraeus Drapetsona.

Just received a used pump from a friend. Tomorrow I’ll install it.

 

[JTM88]

I ran a Liqi Moly engine flush through her and changed the oil. I put some ceratec in with the new oil; I don't know if it will do anything.

 

[Mass_Paul]

Yeah. I noticed them turning together. So i thought i flipped the switch to reverse on my powered screwdriver, but apparently didn't & it ripped it right off.

And i can normally hold the bottom but with needlose vice grips but couldn't find them. Tried needlenose pliers so i could at least do the others and change pcv. That didn't work.

Oh well, i got some slim wrenches & I'll just wait for the grounding kit to come to do everything at once

Even my "ignition" wrenches were not low profile enough. A very slim fit.

 

[Giuseppe Busso]

Just installed the "new" HPFP.
I was impressed by the larger orifice of the new pump compared to mine. Does this means something?

Also, the fault that I had with the defective HPFP. Just for archive to the forum. Hope will help someone anytime.

 

[MonkeyMD]

Even my "ignition" wrenches were not low profile enough. A very slim fit.

Yikes. Might have to look through all my ikea wrenches to see if there's a 10mm lol

 

[Track R]

another year at Laguna go Lizards......

 

[JTM88]

Installed Z23 brake pads and flushed the fluid. I used a pressure bleeder for the first time, it’s a game changer. The vacuum bleeder I used to use took forever.

 

[viewsonic]

Yikes. Might have to look through all my ikea wrenches to see if there's a 10mm lol

If you don't find one, this works: https://www.amazon.com/gp/product/B0791XJ76K/?th=1

 

[dtfd]

ella re kanis malakies stis aftokinito sou pou menis stin Ellada

 

[Cuzoe]

Everybody's favorite thing, adding fuses to the fuse panel, 8 added today. Gotta love the purple pin locks .

 

[GTI Jake]

For all my non technician friends here

ANY wrench can be thinner, just grind it down for free (guess and check, you don’t need to go wild in one shot).

Everyone who turns wrenches for a living has a drawer of modified tools, some so much so that that particular tool now serves only one practical purpose.

 

[MonkeyMD]

For all my non technician friends here

ANY wrench can be thinner, just grind it down for free (guess and check, you don’t need to go wild in one shot).

Everyone who turns wrenches for a living has a drawer of modified tools, some so much so that that particular tool now serves only one practical purpose.

I love that you assume us non technicians have a grinder. You saw what i did with just a screwdriver. Imagine giving me a grinder

 

[toothofwar]

Tried removing the yoke nut off of a BW1339 transfer case one time. Nothing would fit. So now I own a 15/16 socket that is so thin I don't know how it held any torque. But it did it's job, so now it is in the socket drawer to live forever.

 

[Track R]

2015 first gen TCR all black grill...

off topic ordered BMW special tool thin wall 12pt plug socket....