GOLFMK8
GOLFMK7
GOLFMK6
GOLFMKV

What did you do to your mk7 today?

golface

Ready to race!
Location
south of socal
The switch is pretty easy, I paid around $30 shipped and they seem to be Euro/Asian oem; at least they look and feel exactly like the ones my dealer sells for around 4 times as much.

- Footrest:
Pull the old one to the side and up, it'll pop out, then pull on the bottom of the side panel trim and stick your fingers in, you'll feel 2 tabs, push those and the whole thing comes off; slide the long tabs on the bottom of the new footrest to the slots on the floor then slip the edge of the other side under the side trim while you pull the trim out and lastly push the side trim back bending the bottom edge inward until it hops over the small ridge on the footrest.

- Brake:
Pull old one off from either side, push the new one in, done.

- Accelerator:
Be patient with this one, you need to slide it on top of the old one starting from the bottom; make sure all the edges of the new pedal are wrapped over the edges of the old one, bit tricky but not difficult once you get the hang of it.
 
Last edited:

primaltugboat

Passed Driver's Ed
Location
Georgia
The switch is pretty easy, I paid around $30 shipped and they seem to be Euro/Asian oem; at least they look and feel exactly like the ones my dealer sells for around 4 times as much.

- Footrest:
Pull the old one to the side and up, it'll pop out, then pull on the bottom of the side panel trim and stick your fingers in, you'll feel 2 tabs, push those and the whole thing comes off; slide the new one in engaging the long tabs on the bottom of the footrest to the slots on the floor then slip the edge under the side trim while you pull it out.

- Brake:
Pull old one off from either side, push the new one in, done.

- Accelerator:
Be patient with this one, you need to slide it in on top of the old one starting from the bottom; make sure all the edges of the new pedal are wrapped over the edges of the old one, bit tricky but not difficult once you get the hang of it.

You don't happen to have a pic of the old ones do you? I have the sport pedals from the previous owner of mine and really don't like how dirty they get. Thinking about switching mine out.
 

AtlantaDad

Drag Race Newbie
Location
Cumming, GA
You don't happen to have a pic of the old ones do you? I have the sport pedals from the previous owner of mine and really don't like how dirty they get. Thinking about switching mine out.
Wait...the GTI doesn't come with sport pedals? What makes these different? I'm gonna have to look at mine after work now...

Sent from my SM-N920V using Tapatalk
 

jmp4golfvw

Ready to race!
The switch is pretty easy, I paid around $30 shipped and they seem to be Euro/Asian oem; at least they look and feel exactly like the ones my dealer sells for around 4 times as much.

- Footrest:
Pull the old one to the side and up, it'll pop out, then pull on the bottom of the side panel trim and stick your fingers in, you'll feel 2 tabs, push those and the whole thing comes off; slide the long tabs on the bottom of the new footrest to the slots on the floor then slip the edge of the other side under the side trim while you pull the trim out and lastly push the side trim back bending the bottom edge inward until it hops over the small ridge on the footrest.

- Brake:
Pull old one off from either side, push the new one in, done.

- Accelerator:
Be patient with this one, you need to slide it on top of the old one starting from the bottom; make sure all the edges of the new pedal are wrapped over the edges of the old one, bit tricky but not difficult once you get the hang of it.
thanks for the details. I gotta get a set. Do you have a link where you bought the pedals?

So you leave the accel pedal on and new one over it, but for brake you remove old and install new? Weird [emoji6] I've heard that accel pedal is a pain..



Wait...the GTI doesn't come with sport pedals? What makes these different? I'm gonna have to look at mine after work now...

Sent from my SM-N920V using Tapatalk
yeah the golf has the regular black rubber-ish pedals and the GTI has the silver "sport" pedals [emoji106]
 

codespyder

Ready to race!
Location
Toronto
Yesterday I put on S2T paddles. Was on the fence before but decided to do it anyway. Paddles should have been this size from the factory. If I were S2T I'd considering selling plastic ones that are less expensive because that would be a much easier sell.

Also made my back badge white :)



 

aunsafe2015

Ready to race!
Location
USA
Yesterday I put on S2T paddles. Was on the fence before but decided to do it anyway. Paddles should have been this size from the factory. If I were S2T I'd considering selling plastic ones that are less expensive because that would be a much easier sell.

Also made my back badge white :)



Did you get a new badge or use inlays? Also, are those cherry tails or bright red?

Sent from my E5823 using Tapatalk
 

Tone1

Ready to race!
Location
Michigan
Stuffed it full of wheels and tires. With one riding shotgun.




And mounted:
 

Zacr811

Ready to race!
Location
Toronto
The vinyl was only $20, and I felt like it would be a cool little project. I wanna vinyl wrap the roof black next so it was a good experience.
I tried wrapping my roof. It's not an easy as you would think. Removing the antenna is very hard to do.

Sent from my SM-G925W8 using Tapatalk
 

golface

Ready to race!
Location
south of socal
thanks for the details. I gotta get a set. Do you have a link where you bought the pedals?

So you leave the accel pedal on and new one over it, but for brake you remove old and install new? Weird [emoji6] I've heard that accel pedal is a pain..
Yep, it's weird alright but the stock accel pedal seems to be molded to the metal or something 'cuz I couldn't get it off.

Afterwards I did some research and found others doing the same thing (e.g. agentphish) so I left it as is and haven't had any issues with it moving or sliding off, you just have to make sure it's on properly, once you think you have it wiggle it to check, it should be on pretty tight with no give either up/down or sideways.

I got mine here,
http://www.ebay.com/itm/281957160559?_trksid=p2060778.m2749.l2649&ssPageName=STRK:MEBIDX:IT
 

Tone1

Ready to race!
Location
Michigan
Man that must've been wheelie tiring...

Sent from my SM-N920V using Tapatalk

Woooof.. Haha but yeah hauling them in and out of my 2nd story apartment wasnt fun but worth it
 

jmp4golfvw

Ready to race!
Yep, it's weird alright but the stock accel pedal seems to be molded to the metal or something 'cuz I couldn't get it off.

Afterwards I did some research and found others doing the same thing (e.g. agentphish) so I left it as is and haven't had any issues with it moving or sliding off, you just have to make sure it's on properly, once you think you have it wiggle it to check, it should be on pretty tight with no give either up/down or sideways.

I got mine here,
http://www.ebay.com/itm/281957160559?_trksid=p2060778.m2749.l2649&ssPageName=STRK:MEBIDX:IT



Thanks for the link and the install tip, really appreciate it [emoji106] bout to order a set right now [emoji6]
 
Top