Tomioka Racing
New member
- Location
- Huntington Beach
- Car(s)
- MK7 Golf R
I'm guessing that was a mistake.In regards to the IHX675, what qualifies as "no supporting mods"?
Pretty sure it was. It's my car, it has a lot of supporting mods.I'm guessing that was a mistake.
I think the 475 is closer to the std Vortex, the 600 is closer to the xl and the 675 is a bit bigger than the xl.ihx475=in between is38 and std vortex
ihx600=std vortex
ihx675=vortex xl
or thereabouts
Using Tomioka numbering convention I would say.I think the 475 is closer to the std Vortex, the 600 is closer to the xl and the 675 is a bit bigger than the xl.
Pretty sure the 675 is a Kinugawa GTX3071R CHRA with reverse wheels and the 73mm exducer quoted by Tomi is the OD since they all have extended tip.Both turbos are made by Zage.
Yes the 675 is a GTX3071R but it's made by Zage. http://www.zageturbo.com/index.php/main/products#/details?cid=101&id=567Pretty sure the 675 is a Kinugawa GTX3071R CHRA with reverse wheels and the 73mm exducer quoted by Tomi is the OD since they all have extended tip.
Kinugawa Ball Bearing CHRA Core Gen II GTX3071R - Cartel Australia (cartel-aus.com)
Same stuff different Taiwan company name I guessYes the 675 is a GTX3071R but it's made by Zage. http://www.zageturbo.com/index.php/main/products#/details?cid=101&id=567
Just get an XL and be done with it.watching...