The Daily Driver & Motorsports Golf R

[mto386]

motegi with the federals are great for the track. no vibrations with proper balancing.

 

[mto386]

Gearing up for a few track sessions in New England this summer. Bought dsg oil/filter, haldex oil, engine oil/filter, new larger intake filter, track pads going back on once spring hits. Just bought a house so garage will need a nice new epoxy floor and a bit of painting soon.

pictureless posts are boring.

 

[mto386]

considering selling, not tracking much and expanding the family. drop me a message if you're interested.

 

[Diggs24]

Nickel plated steel
https://www.mcmaster.com/spade-connectors/high-temperature-quick-disconnect-terminals/

About to swap my pump to a larger Walbro and suspect 3 years of ethanol has corroded it. To confirm the connector is 16-14 0.25" not 0.187"?

 

[daconchslop]

About to swap my pump to a larger Walbro and suspect 3 years of ethanol has corroded it. To confirm the connector is 16-14 0.25" not 0.187"?

Take pics please.

 

[Diggs24]

Take pics please.

Sure, of what part?

 

[daconchslop]

Sure, of what part?

Just the general condition of the pump assembly, wiring and how the sock filter looks.

 

[mto386]

About to swap my pump to a larger Walbro and suspect 3 years of ethanol has corroded it. To confirm the connector is 16-14 0.25" not 0.187"?

I can measure this weekend. Got a spare pump basket somewhere.

 

[Wastegate13]

I can measure this weekend. Got a spare pump basket somewhere.

What are we measuring? My stock pump and basket is sitting on my toolbox.

 

[Diggs24]

What are we measuring? My stock pump and basket is sitting on my toolbox.

I wanted to know if this corroded connector was 0.187" or 0.25".

https://www.golfmk7.com/forums/inde...motorsports-golf-r.357665/page-9#post-7469207

 

[Wastegate13]

I wanted to know if this corroded connector was 0.187" or 0.25".

https://www.golfmk7.com/forums/inde...motorsports-golf-r.357665/page-9#post-7469207

Here’s the male end. It’s from an R, hopefully the Gti is the same.

 

[Diggs24]

Thanks so then female end must be 0.25"

 

[daconchslop]

Thanks so then female end must be 0.25"

 

[Diggs24]

Bought both sizes. Will report back. Will have spares if anyone needs any.

 

[mto386]

Bought both sizes. Will report back. Will have spares if anyone needs any.

You didn't report back.