GOLFMK8
GOLFMK7
GOLFMK6
GOLFMKV

SOLD!

tWat

Ready to race!
Location
SoCal
SOLD!!!!!!!!!!!!!






I bought the 6 piston caliper only kit direct from Neuspeed a little over a year ago for my R. Installed them and the same weekend I took the R to Laguna Seca for a track day. These brakes on stock rotors and some track pads were amazing! Shortly after getting back from the track I noticed that the caliper finish was literally peeling off. I put around 1k street miles on these calipers before removing them to have them stripped and powder coated. I went ahead and had them completely rebuilt with new seals, cross over tubes etc since it was apart for the powder coating. When I got them back I went ahead and installed some new Neuspeed 2 piece 340mm rotors. I put about 200 miles on them after that and had then I decided to sell the car at the beginning of last summer but it's been sitting ever since and I just started pulling the car apart.

I'm also including:

Isweep 2000 Front street pads still like new
Isweep 3500 Front track pads about 75%
Isweep 3000 Rear track pads around 90%

340mm 2 piece rotors less than 500 miles pretty much like new still (trust me you don't need 370mm ones)

Neuspeed braided/coated front & rear brake lines

ECS brake pad sensor bypass

Asking $2,400 shipped in the lower 48 for everything

You can see from the pics that everything pretty much looks brand new!

Located in Socal but willing to ship since I have all the original packaging and boxes.

IMG_20211230_184821_MP.jpg
IMG_20211230_184849_MP.jpg

IMG_20211230_184840_MP.jpg

IMG_20211230_184915_MP.jpg

IMG_20211230_184922_MP.jpg

IMG_20211230_184946_MP.jpg


IMG_20211230_185323_MP.jpg

IMG_20211230_185354_MP.jpg

IMG_20211230_185354_MP.jpg

Neuspeed Caliper Rebuild 5.21.21.jpg
 
Last edited:

GTIfan99

Autocross Champion
Location
FL
GLWS

Fantastic brake setup.
 

GTIfan99

Autocross Champion
Location
FL
Fantastic setup, but too rich for my blood. I haven't run out of braking yet on my current setup.
 
Top