GOLFMK8
GOLFMK7
GOLFMK6
GOLFMKV

Replaced PCV Oil separator

GTIfan99

Autocross Champion
Location
FL
Took 6 hours going fast, because I dropped a triple square into the open engine...

Not really, but I could see that happening :ROFLMAO:

I'd cry.
 

cbenjes

Go Kart Newbie
Location
Bel Air, MD
Let me see if I can take a couple of pictures. Verbally, here's what I have:

I have a dual pod mount located on the air vent:
https://aeroforcetech.com/products/...ti-for-2-1-6-52mm-gauges-aeroforce-technology

I installed a 42DD oil pressure relocation kit:
https://www.urotuning.com/products/42dd-oil-pressure-relocation-kit-vw-audi-42-022

The gauge is a VDO Vision analog oil pressure gauge:
https://www.summitracing.com/parts/vdo-3501041

The other gauge is my boost gauge:
https://www.newsouthperformance.com/product/vw-white-30-inhg-30-psi-boost-gauge/

The two gauges don't match each other very well because I used the oil pressure gauge left over from my '99 TDI New Beetle. I like the way it looks, it definitely doesn't look factory, but they are very functional.
 
Last edited:
Top