You drop in to tell me bad news? No soup for you
7
PowerDemon’s '15 MK7
- Thread starter PowerDemon
- Start date
mwoodski
Autocross Champion
- Location
- Not Fancy CT, USA
- Car(s)
- 17 Golf SW 4mo
damn that paint looks fantastic!
PowerDemon
Autocross Champion
- Location
- Richmond, VA
- Car(s)
- Golf GTI, Camaro ZL1
As AJ said it is M18. Additionally the stock 5.0 M18 batteries you might already have laying around are not enough for it if you’re doing a lot of correcting IMO.
I had also picked up an M18 1/2” mid torque that came with their two 5.0 batteries and I figured they'd work fine with the polisher. M18 is M18 right?
Well they work but they don’t last very long. I’d say I got 10-15mins of runtime when correcting and leaning into the machine pretty hard. I would 100% recommend getting the 6.0 high output batteries for this machine if you can. The 5.0 batteries will work, but it sucks them down so quickly I had to buy a fast charger to keep the other one ready to go by the time it killed the first one. YMMV
That said I had no problems with the finish polish and foam pad. Plenty of run time. Run time seems to be directly proportional to how hard you lean on the machine. In my limited experience at least.
PowerDemon
Autocross Champion
- Location
- Richmond, VA
- Car(s)
- Golf GTI, Camaro ZL1
Diggs.. I forgot I had a business trip to Mexico this morning so I decided to take the Camaro instead and do a couple rips for ya.
Let’s see.. DA was pretty good as you can see. Car had a full tank of gas and I ran both passes back to back on the same road just different directions. I did use NLS. These are the two best of the 3 pulls I did. I of course missed 3rd the first time and botched it to a 9.1x or something.
Car is bone stock besides the suspension stuff in the rear and lowering springs. I’m pretty pleased for a stock MT car, and I’m sure it would go faster with more practice. I’m toying with the idea of grabbing a pail of Sunoco 260GT to run in it and see if it makes a difference. They say these motors are almost always pulling timing due to fuel quality even on the factory tune. Anyway.. good enough for now
Let’s see.. DA was pretty good as you can see. Car had a full tank of gas and I ran both passes back to back on the same road just different directions. I did use NLS. These are the two best of the 3 pulls I did. I of course missed 3rd the first time and botched it to a 9.1x or something.
Car is bone stock besides the suspension stuff in the rear and lowering springs. I’m pretty pleased for a stock MT car, and I’m sure it would go faster with more practice. I’m toying with the idea of grabbing a pail of Sunoco 260GT to run in it and see if it makes a difference. They say these motors are almost always pulling timing due to fuel quality even on the factory tune. Anyway.. good enough for now
19birel
Autocross Champion
- Location
- Pittsburgh
- Car(s)
- MK7.5 - MK4 - B8.5
Blimey O! That thing MOVES!
mwoodski
Autocross Champion
- Location
- Not Fancy CT, USA
- Car(s)
- 17 Golf SW 4mo
oh hell yeah
Diggs24
Autocross Champion
- Location
- de plains! de plains!
- Car(s)
- 2015 GTI
Nice! Would be a good run for Tapioca XL as I suspected.
My set is all M12 too, lol. The struggle is real.
PowerDemon
Autocross Champion
- Location
- Richmond, VA
- Car(s)
- Golf GTI, Camaro ZL1
I think it would be. I looked back in your thread and saw you posted a 8.4x but said you had some power pulled out for 2nd gear traction.
I think if you ran that tune we’d have a pretty tight race on our hands.
Now it’s time for headers and a ported blower
Diggs24
Autocross Champion
- Location
- de plains! de plains!
- Car(s)
- 2015 GTI
Headers and a ported blower....bye bye ZL1. I'd be seeing taillights.
PowerDemon
Autocross Champion
- Location
- Richmond, VA
- Car(s)
- Golf GTI, Camaro ZL1
Some new shoes for the Z today. Fell into a deal I could not resist. Should shed about 10lbs on each corner... Pretty excited to see if that makes a tangible difference.
These are Apex VS 5RS in "brushed clear”. Sizes are 20x10.5 20x11.5 wrapped in Michelin Pilot Sport 4S 285-30-20 and 305-30-20. The car is lowered on BMR springs.
Overall I am very pleased with how it turned out. When I replace the tires I’ll probably go for one size up because these are just a bit stretched for my liking.
I don’t know what the hell is going on with these pictures. I normally don’t have any problems. I’ll try editing it later. Sorry guys
These are Apex VS 5RS in "brushed clear”. Sizes are 20x10.5 20x11.5 wrapped in Michelin Pilot Sport 4S 285-30-20 and 305-30-20. The car is lowered on BMR springs.
Overall I am very pleased with how it turned out. When I replace the tires I’ll probably go for one size up because these are just a bit stretched for my liking.
I don’t know what the hell is going on with these pictures. I normally don’t have any problems. I’ll try editing it later. Sorry guys
Last edited:
SICK !!
That blue with Brushed Clear VS5RS is a nice look
JerseyDrew77
Autocross Champion
- Location
- Virginia & NC
- Car(s)
- 2016 TR GTI S 6MT
Looking good! Now, when is the Procharger getting installed?