tigeo
Autocross Champion
- Location
- Richmond, VA area
I'd like to collect some used oil analysis data for folks using the typical 502 approval oils to see how the viscosity looks - I've been doing UOAs on my oil since the car was new and it appears the the 5W40 oils I've used (Liquimoly Leichtlauf and Molygen) all shear down to a 30w in short-order. Thinking you get some fuel dilution in all DI engines but curious how other oils hold up to viscosity drop over time.
I've attached my UOAs to-date (only one not shown is the first change with factory fill). Also, there are 2 for the ~35K analysis b/c I used LM's engine flush and did a before and after so the right-most one is the correct sample for comparison. I've also graphed my 100C viscosity.
I've attached my UOAs to-date (only one not shown is the first change with factory fill). Also, there are 2 for the ~35K analysis b/c I used LM's engine flush and did a before and after so the right-most one is the correct sample for comparison. I've also graphed my 100C viscosity.