GOLFMK8
GOLFMK7
GOLFMK6
GOLFMKV

Norcal FS/FT/WTB Thread

Mooseman

Ready to race!
Location
USA
Car(s)
2022 TT RS
I've got an OEM mk7 Golf R intercooler. Had 034 install a Wagner unit in mine and they boxed up the oem one for me.
First person that can do $50 and pick it up, it's yours.

I've also got a COBB Accessport with EQT stage 1 91 octane, Stage 1 93 octane, and stage 1 DSG tunes for $850. I'll throw in the intercooler for free if you want both.
DSG Unlock on the accesport is for the DQ250 (0D9300012).
 
Last edited:

BrianVsUniverse

New member
Location
Sacto, Ca
Car(s)
2019 VW R
Hey everyone I'm selling my hardly used Motegi MR140 18x8.5 with an et45 offset with new Continental Vikingcontact7 225/40R18 for 1600 or best offer. I'm in sacramento and willing to drive about 3 hours.
 

Attachments

  • IMG_4810.JPG
    IMG_4810.JPG
    1.9 MB · Views: 58
  • IMG_4811.JPG
    IMG_4811.JPG
    2 MB · Views: 58

StewieMk7

Passed Driver's Ed
Location
CA
OEM Austins from my 2017 GTI S. Some scratches here and there. One rim is slightly curbed. Tires are 3x 225/40 Hancooks (I think the stock tires from when I bought the car) 1x 225/40 Federal Steel Series (nail in one of the stock tires after I purchased the car. Decent to good tread left on all tires.

IMG_0474.jpg


$300 picked up in 530. Get these out of my garage please.
 

Will_

Autocross Champion
Location
SF Bay Area
Car(s)
2017 GTI S DSG
I have a few random parts laying around taking up space…come take these off my hands please.

OBD11 Pro w/ Android Tablet: $50
Carista OBD2 Module (pairs with RaceChrono and other apps for real-time OBD2 overlays on videos): $20
BNIB Zimmerman 272mm rear rotors with half used OEM pads: $free if picked up (Foster City), $20 delivered if you’re close by.

A3E995F8-8C10-4217-9941-CA242F3B01DF.jpeg
 

john_t

New member
Location
San Jose, CA
I am in the bay area and have the following for sale:
  • Stock intercooler - $50
  • Stock Rear Sway Bar - $25
  • Stock Downpipe - $300
  • 5qty 19x8 OZ Ultraleggera HLT Wheels Matte Black (1 bent but held air) - $1k
  • JB4 with cable with water/methanol setup - $600
    • Wiring wrapped with TESA tape
    • Devil's Own 2.25 Gallon tank half full of methanol, pump, nozzles, wiring, and tubing
  • FMINDMK7 Forge Carbon Fiber Intake w/ 2 coolant hoses (Forge w/out check valve, ECS with check valve) - $300
  • CTS turbo inlet pipe and throttle pipe - $125

Open to a package offer for everything.

Take care,
John
 

Attachments

  • OZ_19_8_Tire_Condition.jpg
    OZ_19_8_Tire_Condition.jpg
    182.3 KB · Views: 75
  • OZ_19_8_Rim_5.jpg
    OZ_19_8_Rim_5.jpg
    242.9 KB · Views: 77
  • OZ_19_8_Rim_4.jpg
    OZ_19_8_Rim_4.jpg
    191.7 KB · Views: 71
  • OZ_19_8_Rim_3.jpg
    OZ_19_8_Rim_3.jpg
    270.8 KB · Views: 79
  • DevilsOwn_Tank_CTS_Pipes.jpg
    DevilsOwn_Tank_CTS_Pipes.jpg
    112.7 KB · Views: 84
  • OZ_19_8_Rim_1.jpg
    OZ_19_8_Rim_1.jpg
    200.3 KB · Views: 81
  • GolfR_Downpipe_RearSwayBar.jpg
    GolfR_Downpipe_RearSwayBar.jpg
    209.7 KB · Views: 88
  • MK7_GolfR_Forge_Intake.jpg
    MK7_GolfR_Forge_Intake.jpg
    127.9 KB · Views: 85
  • MK7_GolfR_Intercooler.jpg
    MK7_GolfR_Intercooler.jpg
    151.4 KB · Views: 77
  • OZ_19_8_Rim_2.jpg
    OZ_19_8_Rim_2.jpg
    201.2 KB · Views: 70

Pikkagtr

Ready to race!
Location
Bay area
One last item from my old MK7.5 GTI
BRAND new in box ARM FMIC black with everything included
Didn't even know I haven't sold it yet.
Picked up in the Bay area
Priced these to sell quickly
$250
 

Mooseman

Ready to race!
Location
USA
Car(s)
2022 TT RS
I've got a set of curb rashed cadiz wheels, one of them doesn't hold air, the other 3 are good and wrapped in DWS06 tires with maybe 30% life left.
I've also got a spare tire donut, and a stock Mk7 Golf R intercooler that I took off my R.

$50 for all of that stuff if you're willing to pick up in SF. I'm looking to clear out some space in my storage unit.
 
Last edited:

Knifebright

Go Kart Newbie
Location
Bay Area
Few items for sale in the Bay Area. These are shipped prices.

Things I need/will consider for trade.
  • GM/Continental or equivalent, Ethanol content sensor
  • P3 ethanol voltage adaptor
  • OBD eleven
Response will be faster on insta. HMU for questions/additional photos ect

https://www.instagram.com/p/CiD1sYDP7dP/?igshid=YmMyMTA2M2Y=

1. SOLD Go Fast Bits DV + Performance Diverter Valve T9351 SOLD

This DV+ is used, I ran it for 40K miles or so. Recently went back to stock after I drove a tuned EA888 platform with a stock DV and I liked the response better. People are split on these, personally I liked it, it is a classy functional solution in a world filled with bad solutions to questionably existent problems (looking at you spacers). It does however sound way cooler 🐌💨!!!!
Check your fitment, large range of VAG platform support.

💲7️⃣0️⃣ net to me, 🛳’d U*PS first class CONUS


——————————————-

2. P3 Gauges 80psi analog boost sensor. This sensor was removed from package but is 100% unused in like-new condition minus packaging. I apparently bought two and have one installed so HMU if you need an analog sensor for your multi gauge 🤟🏼

Compatible with P3 Analog, V2, and V3 gauges only!
•Plugs directly into main harness between your P3 harness and your reference boost tap.
* This is the sensor only!
* You will need a boost tap, tubing and a P3 analog, V2 or V3 gauge (of course!).
* Many tap options but the @aprllc manifold tap is by far the best in my humble opinion. I’ve tried 3 avoiding the inevitable. Buy the APR, hammer that shit right on in the manifold and save yourself the headache of trying to get a good reading and accurate temps spacing the TMAP.

💲6️⃣0️⃣ net to me, 🛳’d U*PS first class CONUS

*nothing else found in photos included 👊🏼
Accept: PPFF(preferred), V3nm0, 💲@pp, local cash
 

Attachments

  • 2C616681-A457-4121-B035-5C07CA7B43FB.jpeg
    2C616681-A457-4121-B035-5C07CA7B43FB.jpeg
    1.2 MB · Views: 43
  • 5DDBC576-EA90-485D-AEFA-8657FFE7AEC7.jpeg
    5DDBC576-EA90-485D-AEFA-8657FFE7AEC7.jpeg
    2.2 MB · Views: 40
  • BBAE1DD6-E15A-4B92-A104-DD6B2DE76014.jpeg
    BBAE1DD6-E15A-4B92-A104-DD6B2DE76014.jpeg
    3.8 MB · Views: 44
  • CE85ABCE-6D42-4104-B5D3-C72A24971660.jpeg
    CE85ABCE-6D42-4104-B5D3-C72A24971660.jpeg
    2.2 MB · Views: 35
  • 73B2FD30-3F51-409B-A0C8-D3F4E874BF2E.jpeg
    73B2FD30-3F51-409B-A0C8-D3F4E874BF2E.jpeg
    3.6 MB · Views: 42
  • 5E0EF399-B463-4D5A-81A5-DED59FA5D06B.jpeg
    5E0EF399-B463-4D5A-81A5-DED59FA5D06B.jpeg
    1.3 MB · Views: 36
  • 0E669CEF-1BDA-4C5D-A3E7-6151B84D8B73.jpeg
    0E669CEF-1BDA-4C5D-A3E7-6151B84D8B73.jpeg
    1.2 MB · Views: 44
  • 0F8C8AC4-60FB-4D3E-937C-7DDA9A73C8CE.jpeg
    0F8C8AC4-60FB-4D3E-937C-7DDA9A73C8CE.jpeg
    1.2 MB · Views: 40
  • 071583DE-F1AD-41E2-B34F-374FFC47A685.jpeg
    071583DE-F1AD-41E2-B34F-374FFC47A685.jpeg
    1.7 MB · Views: 38
Last edited:

FarSolar

New member
Location
SF Bay Area, CA
Car(s)
2018 GTI SE
Still have a few items available for pickup in San Carlos. Brought down the prices a bit.

Brand new H&R 24mm Rear Sway Bar [$210] SOLD
Opened box to take pictures but rest of packaging has not been touched. Great handling upgrade.

aFe Magnum Pro Dry S Filter with about 5K miles on it [$25]
Ended up installing a full intake instead. Filter is still very clean aside from a little debris in the inlet side.

NA MK7.5 OEM Taillights [$210]
Full set of the stock taillights off my 2018 GTI. Took these off at about 23,300 miles and are in very good condition. Some very light scratches you can only notice way up close and a few of the little stick on liners seem to have been crushed when the taillights were originally installed. Might sell individually if offered a good price.

Used MK7.5 OEM Rear Sway Bar w/ Endlinks [$20]
Taken off my 2018 GTI SE after approximately 23,000 miles. Has some scratches and one of the plastic triple squares is cracked.

Additional pictures in the links
 

Attachments

  • XARh1LE.jpg
    XARh1LE.jpg
    559.7 KB · Views: 43
  • PXL_20220913_191640988.jpg
    PXL_20220913_191640988.jpg
    428.1 KB · Views: 47
  • CMafmNk.jpg
    CMafmNk.jpg
    270.7 KB · Views: 44
  • Up09su8.jpg
    Up09su8.jpg
    507.2 KB · Views: 49
Last edited:

john_t

New member
Location
San Jose, CA
I am in the bay area and have the following for sale:
  • Stock intercooler - $50
  • Stock Rear Sway Bar - $25
  • Stock Downpipe - $300
  • 5qty 19x8 OZ Ultraleggera HLT Wheels Matte Black (1 bent but held air) - $1k
  • JB4 with cable with water/methanol setup - $600
    • Wiring wrapped with TESA tape
    • Devil's Own 2.25 Gallon tank half full of methanol, pump, nozzles, wiring, and tubing
  • FMINDMK7 Forge Carbon Fiber Intake w/ 2 coolant hoses (Forge w/out check valve, ECS with check valve) - $300
  • CTS turbo inlet pipe and throttle pipe - $125

Open to a package offer for everything.

Take care,
John
Hey All,
I am open to all offers - have to move these items.
Take care,
John
 
Top