GOLFMK8
GOLFMK7
GOLFMK6
GOLFMKV

Lamin-x yellow fog film

hillstrubl

Out driving Mieke...
Location
Philly
Car(s)
2018 VW Golf GTI SE
I recommend getting a 6x12" sheet which is enough to cover both of our fog's. It's easy to cut and work with, for about $16. Here's what the three piece looked like after a few years of use:
Coupon code for 20% off on Lamin-x's site -> SZRNS9J (it just worked)
 

nosmirk

Go Kart Champion
Location
SoCal
Car(s)
7.5 DSG
I grabbed a sheet of Amzn for $12 and cut them to fit the fog light module. As others have said, the LED color temp does mess w/ the yellow. It becomes more of a highlighter yellow/green, than the solid yellow you'd get w/ a regular bulb.
I doubt the LED module can get hot enough to crack the housing, most likely, it's the adhesive splitting from the installation, epecially if you follow their instructions and install dry and subsequently pull off to adjust stretching the film.

Distilled water and Dawn is the best way to install. No adhesive splitting and most of the major bubbles can be smoothed out.
 
Top