6+ is pretty hard to do on 98/93. map2 is pretty much as far as you can go where it runs 5.4 on the top end.
Alright will swich over to 2. Which FOL should I use though?
6+ is pretty hard to do on 98/93. map2 is pretty much as far as you can go where it runs 5.4 on the top end.
Up’d the boost
93
https://datazap.me/u/crxgator/map-6-additive-93-octane?log=0&data=1-4
93+ 3 gal. Of E80
https://datazap.me/u/crxgator/map-6-additive-93-octane-3-gal-e80
I’m going to lower it, and once I put the downpipe in I’ll rock on. Still trying to figure out what IC to get. Do magic again or BMS.
What are your IATs like?
So it’s 30+* above ambient? Ehh.
Looks good. Yeah I used to get some weird timing instances. nbd.Hey guys, new to the forum. I want to get your opinions on this log.
Car is a 2015 GTI 6mt. Only mods are JB4 and IE downpipe. I am on stock clutch so I kept the boost conservative in the lower rpms.
Here are my Map 6 settings:
1500: 0
2000:1
2500:2
3000:2
3500:3
4000:4
4500:4.5
5000:5
5500:5
6000:5
6500:4.5
7000:4.5
FOL: 50
Boost safety: 25
I'm running 93 octane during this pull and it was around 35° out. There was also a weird issue with ign1 during the beginning of the pull that I'm not sure about.
https://datazap.me/u/zachmk7gti/map6-log?log=0&data=1-2-4-11-14-18-25-26-27-28
Awesome. Thanks DiggsLooks good. Yeah I used to get some weird timing instances. nbd.