Is my HPFP dying? (log inside)

[jimlloyd40]

I would use the RS7 plugs or stock heat range gapped at .024.

 

[zoominms3]

https://datazap.me/u/zoominms3/trouble-shooting?log=0&data=15-22

ran this log, its cleaner as I didn't really have wheel spin. IATs are wonderful, 4 over ambient and I have rail pressure again which is great but HPFP is still at 100% and I am not loving that knock in cylinder 3.

 

[zoominms3]

update: installed brisk er10s today and still getting quite a bit of KR in cylinder 3.

https://datazap.me/u/zoominms3/chasing-down-knock?log=0&data=8-15

 

[jimlloyd40]

update: installed brisk er10s today and still getting quite a bit of KR in cylinder 3.

https://datazap.me/u/zoominms3/chasing-down-knock?log=0&data=8-15

What are they gapped at?
Try stock heat range.

 

[zoominms3]

What are they gapped at?
Try stock heat range.

I just took out stock heat range plugs that were gapped at 0.024 and the brisk are gapped at 0.024

 

[zoominms3]

2 gallons of e85 and knock is gone.

https://datazap.me/u/zoominms3/mobils-fuel-trash-part-2?log=0&data=9-15-19-23-34-35

 

[zoominms3]

Update: Auto tech internals just got here today. Ordering the update for my 93 map and skipping the update to my e30 map and going with the OTS e85 map!

Will update after installation!