Installing FEC/SWaP code to MIB with OBDeleven

[marinerro]

I have VW Arteon from USA but it was build in Germany.
Version of Discover Media is showing Europe but maps and languages are from USA region.
Any idea how to unlock europe maps and region?

 

[marinerro]

MIB 3 FEC/SWaP - I need a list for codes to know for what they are:
00000700
00070400
00070500
00070600
00070900
00070a00
00070b00
00071c00

 

[mr-fix]

00000700 - Green Engineering Menu (GEM) MIB3 OI
00070400 - Electronic Voice Amplifier / ICC
00070500 - SDS MIB3 OI
00070600 - Rear Entertainment System
00070900 - WLAN hotspot
00070A00 - Apple CarPlay for MIB3 OI
00070B00 - Google Android Auto for MIB3 OI
00071C00 - Predictive route data for VW

 

[chrispie]

I have a Golf 7.5 with MIB2 Discover Media (no pro!)
The MIB FEC/SWaP Code Generator requires a 10 digit VCRN
According to the detailed view of my installed codes, my VCRN appears to be only 9 digits (xx xx xx x xx)
What's happening here?

 

[mr-fix]

9 = 09

 

[iceorbital]

Hey @mr-fix thanks for your videos. I have a NAR 2019 Golf R 7.5, with an mib2 Delphi unit. The installed NAR maps FEC is 09410006 and I was wondering how can I enable the unit to read EUR maps. Would patching the unit with adding the 09400006 fec then enabling it work?

 

[mr-fix]

AFAIK, FEC alone is not enough. You need first: conversion to EU FW, then patch with new FECs, change coding of the unit for EU. Not even sure how to do this with Delphi. I just know that messing with Delphi is risky.

 

[esteticu]

Is there another FEC/SWaP code for Driving Modes in the 5F navigation too?

Asking because after MIB2.5 retrofit, the GTE mode button works, I can see it in the Instruments, but no popup on the MIB display. I've tried the patched CAN datasets, no go. Charisma Adaptation channels are all Active. What else can it be? Thanks!

 

[mr-fix]

There's no FEC/SWaP in 5F for drive modes. Only adaptation channels.
FEC/SWaP codes for drive modes/Charisma are in Gateway.

 

[TEG]

Hello everyone! I'm an avid reader of the forum but never had the need to register or post any question until now, so I'm sorry that my first post would be a question!
I just reviewed my VCRN from the service menu screen at my Delphi MIB2 but only had a 9-digit code instead of a 10-digit. The last pair is uncomplete and I just have the letter F. Do you know (maybe @mr-fix that seems to be the expert here!) what could be the issue?
Thanks!!!

 

[mr-fix]

Hello everyone! I'm an avid reader of the forum but never had the need to register or post any question until now, so I'm sorry that my first post would be a question!
I just reviewed my VCRN from the service menu screen at my Delphi MIB2 but only had a 9-digit code instead of a 10-digit. The last pair is uncomplete and I just have the letter F. Do you know (maybe @mr-fix that seems to be the expert here!) what could be the issue?
Thanks!!!

F = 0F

 

[TEG]

F = 0F

Worked wonderful, thank you @mr-fix !!!
Couldn't find ICC in my settings menu but I just played 5min and that's it, will look it later.
Thanks again for the help!

 

[mr-fix]

ICC requires additional dataset to be send to the unit (VCP or CarScanner Pro). Once the dataset is send, you will see additional settings.

 

[TEG]

ICC requires additional dataset to be send to the unit (VCP or CarScanner Pro). Once the dataset is send, you will see additional settings.

Just saw it in mibwiki, thanks again for your support and guidance!!
Most likely you'll see me around. It's hard to stop once you start playing around

 

[mr-fix]

If you are going to explore MIB filesystem, you will need D-Link DUB-E100 and USB to UART adapter. Both for fun and in-case-of-emergency.