GOLFMK8
GOLFMK7
GOLFMK6
GOLFMKV

GTI MK7 BOV

El_bigote_AJ

Autocross Champion
Location
Las Vegas
Car(s)
2019 GTI bunny
Haha! Fixed it😅 I was writing that inbetween sets 🤦🏼‍♂️
 

El_bigote_AJ

Autocross Champion
Location
Las Vegas
Car(s)
2019 GTI bunny
Why don't you just focus on those 10lb preacher curls instead of the forum, eh?
I wanted to help Jeff 2.0 see my real world results... jeez.

Cliff notes of my results

Me: I’m having issues

Diggs: take it off

Me : okay.. (few months later puts it back on)

Me again: I’m having issues

Diggs : take it off

Me: but the noise... fine

Diggs: Throw it away

Me: puts in tool box to try again with different spring
 

GTI_Owner

Go Kart Champion
Location
USA
Car(s)
2016 GTI
It’s easier to spot during daily normal driving. But at wot you can see how the fuel trims get dragged along a bit after upshift, even though the difference is less pronounced.

if you really really want to see it. Pull the battery so you can reset learning. Then log. You’ll be able to see it very clearly then. Especially on the first 20 miles of city driving.

why do you want to log this phenomenon anyways?
I've been using a Forge BOV for a while and have not noticed any issues, but I also haven't been looking for anything. I figured since I have the stock DV and an AP I could record some data from the BOV with the AP, go back to the stock DV, log again, and see what improvement resulted. I'd rather not drive around with a less than optimal part and I'm interested to see firsthand what the problem is since I don't notice anything driving.
 
Top