Matt.K
Passed Driver's Ed
- Location
- South Wales
- Car(s)
- Golf R 2017 mk7.5
OK, update.
Just took the car for a spin. In real life driving and reversing it appears that all is working OK
Select reverse, camera opens, image appears with yellow lines active - and by the looks of it quite well calibrated. Deselect reverse, drive forward, camera stays live until speed reaches just over 10mph, image disappears, camera closes after about another 10 seconds.
So when the car is stationary and reverse is selected the camera activates, when reverse is then deselected and the car doesn't move forward there is no signal to tell the camera to close. This does not seem ideal, not sure how much of an issue this might prove to be - time will tell.
So initial feelings for potential fine tuning (and I haven't checked OBD11 yet)
Is there any place in the coding to change the camera closing time - currently around 10 seconds?
Also any place to change the forward speed for camera to turn off - currently around 10mph?
Just took the car for a spin. In real life driving and reversing it appears that all is working OK
Select reverse, camera opens, image appears with yellow lines active - and by the looks of it quite well calibrated. Deselect reverse, drive forward, camera stays live until speed reaches just over 10mph, image disappears, camera closes after about another 10 seconds.
So when the car is stationary and reverse is selected the camera activates, when reverse is then deselected and the car doesn't move forward there is no signal to tell the camera to close. This does not seem ideal, not sure how much of an issue this might prove to be - time will tell.
So initial feelings for potential fine tuning (and I haven't checked OBD11 yet)
Is there any place in the coding to change the camera closing time - currently around 10 seconds?
Also any place to change the forward speed for camera to turn off - currently around 10mph?