BeeryTravler
Ready to race!
- Location
- Longmont
- Car(s)
- Mk7 GTI SE
Hi,
I think $1300 is reasonable given the condition. Located in Northern Colorado, buyer pays shipping, I'll cover PP fees. If you're local I'll install them for you.
Looking to keep this on the forum, if there is no interest I will post to the FB marketplace groups. This is the kit that was found here: https://www.golfmk7.com/forums/index.php?threads/fs-apr-bbk-350x34mm.404827/
(I am surprised they are real, but here we are)
General condition - fully functional, but these definitely have some wear. It looks more like handling/installation wear than use. Various dings and scuffs throughout. Pads have plenty of life, and rotors measure 33.4mm and 33.3mm (34mm start, 32mm minimum). Temp tale stickers are rubbed off, they are about $10 for a 5 pack on McMaster if you want to use them. I never understood them, why not take the temp with IR after each track session?
There are two spots of surface rust on one of the brake lines. Seems fine to me but thought I should note it.
And now for the weirdest part - it looks like the previous owner lost one of the caliper to bracket bolts, and replaced it with a very similar but slightly longer bolt. Same thread, same 10mm allen fastener. I would never have noticed if I didn't take the brackets off. It was definitely secure. This longer bolt has some surface rust on it.
The kit is complete save for one of the pad spacers. Seems like a great kit for someone on a budget who wants a top tier BBK. Let me know if you have any questions or want any more photos.
I think $1300 is reasonable given the condition. Located in Northern Colorado, buyer pays shipping, I'll cover PP fees. If you're local I'll install them for you.
Looking to keep this on the forum, if there is no interest I will post to the FB marketplace groups. This is the kit that was found here: https://www.golfmk7.com/forums/index.php?threads/fs-apr-bbk-350x34mm.404827/
(I am surprised they are real, but here we are)
General condition - fully functional, but these definitely have some wear. It looks more like handling/installation wear than use. Various dings and scuffs throughout. Pads have plenty of life, and rotors measure 33.4mm and 33.3mm (34mm start, 32mm minimum). Temp tale stickers are rubbed off, they are about $10 for a 5 pack on McMaster if you want to use them. I never understood them, why not take the temp with IR after each track session?
There are two spots of surface rust on one of the brake lines. Seems fine to me but thought I should note it.
And now for the weirdest part - it looks like the previous owner lost one of the caliper to bracket bolts, and replaced it with a very similar but slightly longer bolt. Same thread, same 10mm allen fastener. I would never have noticed if I didn't take the brackets off. It was definitely secure. This longer bolt has some surface rust on it.
The kit is complete save for one of the pad spacers. Seems like a great kit for someone on a budget who wants a top tier BBK. Let me know if you have any questions or want any more photos.