Diggs24 Build Thread - "Tapioca XL"

[Diggs24]

uwotm8?

 

[Diggs24]

Low boost testing, sorry it isn't fast.

https://flic.kr/p/2nmg9hn

 

[Diggs24]

Not a great one but you get the jist.

https://flic.kr/p/2nmaLbC

 

[Diggs24]

Data. Having an O2 sensor issue ATM. Ever since I took it in for service. Looking into it. Look how quick it builds boost though.

https://datazap.me/u/diggs24/log-1652843021?log=0&data=8-17

 

[Switchleg]

If you look here the square is where he was holding the SET button where its set to maintain rpm within about 64rpm from engagement point (user configurable). SET button is held for 1.5 seconds in this log building from 0 to 20psi.
https://datazap.me/u/diggs24/log-1652843021?log=0&data=8-17-97

 

[daconchslop]

Cool shit chaps.

 

[the]

View attachment 249439

@Switchleg is a madman.

oooooh. I want to do the thing.

 

[Diggs24]

Gave it some of the good stuff.

https://flic.kr/p/2nnepEh

 

[904mk7]

Gave it some of the good stuff.

https://flic.kr/p/2nnepEh

Do you anticipate better 60-130 times with rolling antilag? Excited to see the video with the 02 sensor fixed!

 

[Diggs24]

Still working out some kinks so it ramps in smoother (see how rpm jumps?). When it’s done I’ll grab some dragy 60-100 to compare. It’s only getting hotter out though.

 

[Subliminal]

Other than letting everyone around know you're cooler than them, what's the benefit of rolling anti lag over brake boosting? Isn't BB generally easier on the car and just as effective?

 

[904mk7]

Still working out some kinks so it ramps in smoother (see how rpm jumps?). When it’s done I’ll grab some dragy 60-100 to compare. It’s only getting hotter out though.

I did see that, I wasn't sure what that was. Agreed. It's hot as hell here already.

 

[Diggs24]

I don't have to modulate anything. With BB you have to push the brake and gas while trying to maintain a set speed. Easier to just push a button and jam your foot to the floor.

 

[Diggs24]

Also, you can pick how much boost you want to build vs brakeboost you are defined by your tune. Say your tune make 27psi at 4k. You brake boost and you will make anything from 0-27psi. Let's say i don't want to launch it at 27psi but instead at 20. well you can tune it so it only builds to 20psi with BB. It will still make 27psi if you just floor it without BB.

 

[Diggs24]

Also, this spools much faster than BB. Here is the data from that video:

https://datazap.me/u/diggs24/log-1653272321?log=0&data=8-17-58-98&mark=784-846

200rpm to go from 0 to 29psi in 3rd on a hybrid. Try that with BB.


Next step is to try and not hit 29psi because as you can see it is too violent.