Diggs24 Build Thread - "Tapioca XL"

[daconchslop]

New housing is kicking some serious ass. Bring on your Bugattis!

https://flic.kr/p/2mtYTF8
https://flic.kr/p/2mu4ESg

Wth?

 

[PowerDemon]

That 1 mile trap speed really is something

 

[Diggs24]

https://flic.kr/p/2mu6zvK
Full tank of E50.

 

[jimlloyd40]

https://flic.kr/p/2mu6zvK
Full tank of E50.

Now that's more like it.

 

[daconchslop]

Looks like you can still shave off a few tenths You try brake boosting yet?

 

[Diggs24]

Looks like you can still shave off a few tenths You try brake boosting yet?

tried a few times here and there and it spins. was going to last night but it started sprinkling

 

[daconchslop]

Yea cause just barely missing the 60 in full boost. Maybe try building up to around 15psi before dropping the hammer. The XL housing really woke that Tomi up.

 

[Diggs24]

I also flashed the 7200rpm DSG file so I can stretch out 3rd further. I'm sure that helped too.

 

[daconchslop]

That made a huge difference on my trap speeds when I went the Stg3 TCU. I was shifting at 6800 on the Stg2 file. Pretty sure my valvetrain cries every time I get up there

 

[arob157]

That made a huge difference on my trap speeds when I went the Stg3 TCU. I was shifting at 6800 on the Stg2 file. Pretty sure my valvetrain cries every time I get up there

I think it is just our brains being calibrated to stock turbos. Feel like the valvetrain cried more when our IS20 or IS38s were barely pushing any air through the engine at 6500rpm. Now I like to think the valvetrain feels like it is contributing what it can and is stoked to be doing it's job so well lol.

 

[JerseyDrew77]

That made a huge difference on my trap speeds when I went the Stg3 TCU. I was shifting at 6800 on the Stg2 file. Pretty sure my valvetrain cries every time I get up there

Make that bitch scream bloody hell!!!

 

[Diggs24]

I thought the road was flat but guess not. It was a bit damp and spun so not sure how that impacts the numbers up top. Need a new 60-130 but it is definitely faster than before so should be able to do low 8s I'd think. Also, just realized the DSG tune is set to 7200 shift but the ECU tune is not.

https://datazap.me/u/diggs24/36-60-100?log=0&data=1



https://flic.kr/p/2mwZpA9
https://flic.kr/p/2mwZ5qp

 

[EpicTech]

Very flat and consistent torque curve from 4600rpm to 7k, me likey !!

 

[Diggs24]

Very flat and consistent torque curve from 4600rpm to 7k, me likey !!

lmao, yeah you can ignore anything below 6k.

 

[Diggs24]

Here's actual low end power. 4th gear, flooring it from 2500. Could make more torque by spinning it up straight up to 30psi but it has plenty... for now.

https://datazap.me/u/diggs24/xl-4th-spool?log=0&data=1

https://flic.kr/p/2mxiwrd