Broken Plastic Mount Prong during intake install

[Octoman5]

Hey guys so I was installing my S&B intake and accidentally broke the far right plastic mount prong nipple looking thing that holds the intake in place. I was wondering if anyone has done this before and what kind of solution they used to fix or place it. In the bottom right, right underneath the cable in the picture you can see the nipple piece im talking about. Appreciate any help.

PS: I already installed the intake and it hold find, though there is some play. I would just like to fix it, just to not have anything broken on the car. lol

 

[JerseyDrew77]

Zip ties have always been my favorite 'go to' solution for things that I have broken. You can try that or Super Glue.

 

[Ridebjj]

If it's plastic, broken and you have all the pieces, the answer is "q bond", imo

 

[imthanick_a]

Yes I broke it doing the same thing. You could get a new battery tray, or what I did was get a long screw with a washer, insert from the bottom, and use a washer and a wing nut on the top. Holding fine after 15k miles