Adding cornering lights

[carbon_gecko]

So I haven't been able to find a definitive solution for this question and I am hoping to have a knowledge bomb dropped on me. I have a 2016 mk7 golf s, and have swapped my basic headlights for the the Helix R lights with dual daytime 'U' lights, projectors and cornering lights. Additionally my car did not fog lights so I retrofitted them through a BCM upgrade and coding, that coding allows the fog lights to be my cornering lights. So my question is this: can I wire the headlight cornering lights in series to the fog lights or will that cause the foglights to fail due to power draw? Additionally would I need to run wires from the headlights to the BCM and code separately? I would like to keep the foglight cornering lights and add the headlight one to help illuminate late night drives, (lots of deer and such around my location)

 

[mr-fix]

Wire cornering lights as separate circuits from BCM.

 

[Guto]

Hi,

I’ve done this retrofit using the Rs headlights and needed an extra module for the headlights range control (hex55) and connect to the gateway to be able to work, not mentioning a new harness that I had to pass to be able to make it work.