Active Info Display themes - coding spreadsheed

[bobloblawGTI]

when i did my install, they programmed it to display the 2 door variant gti, but mine is a 4 door so it does not show rear door open indicator. will coding it to 4 door fix this or is there more to code?

That should do it. iirc there’s no model-specific graphics as in the MIB, you just get a generic Golf (either two door, four door, or wagon)

 

[ksurl]

That should do it. iirc there’s no model-specific graphics as in the MIB, you just get a generic Golf (either two door, four door, or wagon)

so going by the spreadsheet, would that be ID 51, variant 2?

 

[bobloblawGTI]

so going by the spreadsheet, would that be ID 51, variant 2?

Yep, that looks right to me for a 4-dr Mk7.5 GTI. So for long coding in byte 2, bits 3-6 you'd be looking at:

bit 3: uncheck
bit 4: check
bit 5: uncheck
bit 6: uncheck

 

[ksurl]

Yep, that looks right to me for a 4-dr Mk7.5 GTI. So for long coding in byte 2, bits 3-6 you'd be looking at:

bit 3: uncheck
bit 4: check
bit 5: uncheck
bit 6: uncheck

thanks, I'm familiar with binary. haha

 

[ksurl]

can confirm, it shows 4 door with rear door open in red. obdeleven also had a one click app for it. virtual cockpit vehicle model or display. it had preset for 4 door hatch or 4 door kombi based on detecting the connected vehicle