GOLFMK8
GOLFMK7
GOLFMK6
GOLFMKV

2nd trunk light

Rollback50k

Yeshhhhhhhhh
Location
NY
I posted a more detailed version of this in the DIY section if you’re interested but figured I’d share a quick run through here.

Some might think this is pointless and some might even get a heart attack that I cut some plastic off but in my opinion for $7, it was worth it....besides, we don’t own a collectible/classic type of car.

A0CA4E1D-B9F2-444F-BD9F-B3D197B3765C.jpeg
0C743263-DF3A-4709-84CF-016CDF3EC9B1.jpeg
7D9FCECE-F38E-4180-8A85-E2C07FA1FF8E.jpeg
FF8CF110-9429-4596-AC05-69B4452D0EE1.jpeg


It’s not perfect but it’ll do for now. I need to get matching LED (passenger side is Ziza and driver side is one my friend gave me which appears to be AliExpress)

Link to where I bought the harness (you can buy the set of matching lights and a harness from them or source your own light and just get the harness from them. I just wouldn’t recommend using regular bulbs as LEDs draw much less power):

https://a.aliexpress.com/_mrLckst

Before
A385F3DE-A126-4D0E-835E-44D797FC6678.jpeg

After
65886384-72FC-47BC-81B4-38528F4DD21E.jpeg
 
Last edited:

dopman

New member
Location
Finland
Car(s)
Mk 7.5
I have the same parts coming in probably in a few days.
Nice to se that I'm not the only one who got this idea!

I will be adding a third light under the false boot floor also

https://s.click.aliexpress.com/e/_A6UYbi I ordered theese LEDs, as I believe they will be more efficient than the halogenbulb replacements.
 

Rollback50k

Yeshhhhhhhhh
Location
NY
I have the same parts coming in probably in a few days.
Nice to se that I'm not the only one who got this idea!

I will be adding a third light under the false boot floor also

https://s.click.aliexpress.com/e/_A6UYbi I ordered theese LEDs, as I believe they will be more efficient than the halogenbulb replacements.
Awesome idea, I might have to consider that in the future.
And yeah that looks like the one my friend gave me. Unfortunately it gives off a hint of yellow compared to the passenger side which I have a Ziza light in. It’s still a lot better like you said and safer than running halogen bulbs but the lights not matching is bothering me a bit lol
 

Rollback50k

Yeshhhhhhhhh
Location
NY
Did you run the wiring under the floor carpet and panel?
No, I ran it across the headliner.

I removed the plastic panel that covers the two rubber accordion style boots (you do not need to remove the boots). And dropped the pigtail alongside the upper side panel.
2F05D3F1-9CE3-42DC-98C8-1D61A3F4021E.jpeg
 

dopman

New member
Location
Finland
Car(s)
Mk 7.5
Awesome idea, I might have to consider that in the future.
And yeah that looks like the one my friend gave me. Unfortunately it gives off a hint of yellow compared to the passenger side which I have a Ziza light in. It’s still a lot better like you said and safer than running halogen bulbs but the lights not matching is bothering me a bit lol

Got the lights installed today. The ones I got didn't have the yellow hint as you sugested which is nice.
Pulled the cables behind the trunk trim. The light I put under the false boot floor coudn't be fit in the middle, as there is a steel bar behind the trim, so had to put it on the side. Two of the extensioncables have enough length for the complete modification.

The holes were cut with a dremel tool. I drew the rectangles for the holes on pieces of masking tape and put the tape where I wanted to cut.

Easy 30min~ish modification.

The parts I used:
https://s.click.aliexpress.com/e/_9gCs8q
https://s.click.aliexpress.com/e/_9QJDc6

golf_2.jpg
golf_1.jpg
 

Rollback50k

Yeshhhhhhhhh
Location
NY
Got the lights installed today. The ones I got didn't have the yellow hint as you sugested which is nice.
Pulled the cables behind the trunk trim. The light I put under the false boot floor coudn't be fit in the middle, as there is a steel bar behind the trim, so had to put it on the side. Two of the extensioncables have enough length for the complete modification.

The holes were cut with a dremel tool. I drew the rectangles for the holes on pieces of masking tape and put the tape where I wanted to cut.

Easy 30min~ish modification.

The parts I used:
https://s.click.aliexpress.com/e/_9gCs8q
https://s.click.aliexpress.com/e/_9QJDc6

View attachment 194722View attachment 194723
Looks great!
I think shade of yellow or off white I mentioned is more noticeable on my car as one side has the China light and the other is the Ziza which I have on the way at the moment. You can see the different shade of color from this picture.
189B7553-65F2-4911-B529-EB3757BCDE80.jpeg
 

dopman

New member
Location
Finland
Car(s)
Mk 7.5
Looks great!
I think shade of yellow or off white I mentioned is more noticeable on my car as one side has the China light and the other is the Ziza which I have on the way at the moment. You can see the different shade of color from this picture.
View attachment 194797
Didn't even notice it earlier. You could always change them to the same ones if it becomes an issue. But I guess that it probably isn't as noticeable when you aren't looking for it.
 

Rollback50k

Yeshhhhhhhhh
Location
NY
Didn't even notice it earlier. You could always change them to the same ones if it becomes an issue. But I guess that it probably isn't as noticeable when you aren't looking for it.
Yeah I was going to order it later on but my wife left the “Recent Orders” screen from ecs up on the computer and there were a few things there, one being the 2nd Ziza light for the driver side (....ooops, I don’t think I was supposed to see that lol. My guess is stocking stuffers from her to me)
 
Top