Search results

@YamR1rider has a good thread, oilfilter housing needs to come off as said to replace both gaskets. https://www.golfmk7.com/forums/index.php?threads/diy-removal-of-intake-carbon-cleaning-injectors-water-pump-oil-cooler-accessory-bracket.416188/

Bump for good price and Zage 770 beans somewhere else on the forum maybe 😋

Would be nice to test MK8 Conti injectors, looks like they fit with provision for double seals but no clue how different they would work in our HPFP system.

If there is no build up in the oil filter or housing you don't have probable cause to pull the engine. You might have just dropped some dirt replacing the PCV that scored a cam journal.

Fine, all oils are blends of base oils and additive packages and just changing with same oils you blend some of the old now very different with the new. Keeping within spec is what is important.

Oh, I bet the idle went up a bit when that happened. 😅 What turbo is that though? Looks similar to a G30-900 and I have seen RAC starting to use a Xona style 5+5 turbine in Zage housings.

S3 - BCP + BBT built engine // 62/77 + D5 turbo // PR MPI + DW 1500cc // RS3 LPFP + Lift Kit Bump for that build :D

Looks to be the Cooper/Hanon version, should even be the right lenght rod so it will work. https://www.mambatek.com/en/products/genuine-electric-turbo-wastegate-06l145614b-fits-is20-audi-a4-a5-a6-a7-ea888-g3 I know the Mahle Audi longitude version has a shorter rod that needs an extension but...

Dynamic S+ mode that changes shift rpm depending on brake and accel pedal pressure and not enabling shifting in cornering looks nice.

Unfortunately these engines cant seem to take the prolonged track abuse without overheating the pistons with any type of hot tune, stock tune they pull all the timing advance and richen it up like crazy. Maybe @Switchleg can patch in EGT sensor controlled WMI to the ECU.

Sucks, did you log that session at all?

I did mine in a dirty farm shop before all the Autotech failures came up, even broke the stock collar and sent the spring flying across the dirty floor. Just sprayed it down with brake clean, installed and never missed a beat. 😅

Cool, so it was backflip Ryan who put your baby against the wall.

Nice, but they dont seem to advertise that one. Did you contact them to order?

Is that a Zage 76r bought directly from them since there is no coating on the housing and what do they charge if so, I think Arashi usually discount to 1600?

Not sure probaby a littco hybrid on pump gas, he posted to a dragy group but dont remember the time but nothing crazy. He has an R8 v10 tt for that. 😅

Ben from Littco did a daza and dq500 swap on his clubsport in the driveway and kept it fwd.

Wordle 1 053 5/6 ⬜⬜⬜⬜⬜ 🟨⬜⬜⬜⬜ ⬜⬜🟩⬜⬜ ⬜🟩🟩🟩🟩 🟩🟩🟩🟩🟩

Wordle 1 052 X/6 ⬜⬜⬜🟨⬜ 🟨⬜⬜⬜🟩 ⬜🟨⬜⬜🟩 ⬜🟩🟩⬜🟩 ⬜🟩🟩🟨🟩 🟩🟩🟩⬜🟩 fml :LOL:

ordlig.se WEEKEND nr 837, 5/6 🟨⬜🟩⬜⬜🟨 🟩🟩🟩⬜⬜⬜ 🟩🟩🟩🟨⬜⬜ 🟩🟩🟩⬜🟩🟩 🟩🟩🟩🟩🟩🟩 How many on the forum can solve one from https://ordlig.se/? :LOL: