Search results

Thank you for the clarification, the Mk8 Door Control Modules I am referring to are the 5Q0 959 592L and 593L. These did take the programming but the one touch window did not work even after calibration via OBD. Updated my original update to clarify.

Finally made it to the dealership early enough to get my car looked at and was told my factory module was busted. Reprogrammed the GTI modules and they worked perfectly. So to clarify for future Google-fu padawans. 2019 Mk7.5 Golf Sportwagen will have no lights or working switches if the...

I checked each connection multiple times and they were all properly clicked and seated.

Here's the Vagcom Error reading for the door control modules.

Forgot to add, I can roll the window up with vagcom, as it still sees the module.

I swapped my door control modules on '19 Sportwagen for 392/393m to 592/593F before Power Folding Mirrors. After swapping them in, none of the door switches would illuminate, which I haven't seen anyone else have an issue with which is weird, so I swapped the door modules back to stock, but...

Truly living up to it’s German Heritage.

Not to advertise too hard, but Apex offers a 50% replacement program for wheels, you just have to send it to them. https://apexwheels.com/replacement-program

According to EQT's website, they have a version for the 8K0 and 4D0 Coilpack connector, do you remember which version you purchased?

So it basically comes down to "Put a better Shark Fin". Thanks for the help.

I’m asking about how to retrofit a GPS antenna on a car that didn’t have one from factory as stated here. Sorry for any confusion.

Hi, thanks for the write up, do you know where I can find one for a GPS retrofit? Thank you in advance.

Thanks for the offer. Unfortunately I’m not sure which ones I need cause I can’t get the lock out. How’d you get yours out?

LKQ's website is a nightmare to navigate, what section is the subframe in on there?

How did you re-key it? I know you can get VW's lock tumblers but I haven't been able to get my hands on a kit.

I used the trick OP mentioned about looking for 5C6839267 (the part number on the rubber cover) and I was able to get them for 16$ each so give that a shot.

Can you some more pictures? Do you still have the build sheet for them? That'd be great to look at. GLWS.

Pm Sent

Bump

PM Sent.