Search results

Available?

I mean, I installed the Activator after installing the FW. So it seems the manual CP OFF patch is needed. But there isn't the appropriate patch file for US 0883. I retrofitted a MIB2 H/U and 8" screen, and the first thing I did was update the FW to 0883. Now I'm thinking I should downgrade...

I applied the patch but CP is still active. MST2_US_VW_P0883D 0883 3Q0035876B log.txt contents: Activator for MST2 Scale made by Congo & Duke SW rev: 2102 Device type: STD2Nav Brand: VW Device region: NAR FW ver: MST2_US_VW_P0883D FW MU ver: 0883 HW: 851 FAZIT: redacted Patch for...

I struggled with this until I found this post. It worked perfectly. Thanks!

I need to retrofit highline door control modules into my 2019 MK7.5 GSW S. I am having trouble confidently sourcing the parts I need, and would appreciate some insight. I know I need part numbers 5Q4959593F (driver) and 5Q4959592F (passenger). My base model has 5Q4959393F/392F. From what I...

Do you still have the 'virgin pair' of modules, by chance?

I imagine the microphone cable that terminates at the factory quad lock blue connector is a shielded twisted pair cable, and the backup camera cable is RF. Here we are extending these to the glove box with wires that don't offer any resistance to EMI. For those who have done this, have you...

The door control modules let me enable those features and write them via ODB11, but the changes had no effect.

I have found out some things along the way, and will summarize them here in case it helps anyone: Firstly, the OEM dash trim piece above the glove box does not have an LED in the silver strip. Some folks have removed that strip from the trim piece (which is difficult) and retrofitted an...

I presume VW is done releasing FW updates for these 4+ year old units, so that is not so much of a factor?

Ok, so this confirms that the correct pattern is Cyclone Black, which is the one I ordered: 5GM-858-418-A-YOI. Hoping it will get delivered one day! Thanks for checking.

What are the advantages / disadvantages of using the remote coding services of someone like Jack to remove CP and enable FeCs versus patching with custom FW (other than cost)?

I'm just looking for the dashboard trim piece. I already have the door cards and mistakenly thought it would be a simple process to locate the matching dashboard trim piece. Hah! I imagine you have quite a collection of parts in your garage!

Do any of the dashboard trim parts you bought look like this trim from the MK7.5 SEL door card? I am trying match it. I tried to order the -YOI one (described as Cyclone Black w/Light Package), but it is on indefinite national backorder.

Thank you for raising that potential issue; I hadn't thought of it. I checked and my S has the highline door control modules. I don't know why though...there are threads of folks retrofitting the auto folding mirrors to MK7.5 GSW S cars, and they had to upgrade DCMs. I don't care about the...

I am retrofitting SEL seats and door cards into my 2019 Golf Sportwagen S (MK7.5). I would like to get the ambient light strips in the door cards to work. Is it as simple as plugging them into the door control module and coding the BCM? Or would I have to run additional wiring between the door...

I didn't mean it like that....but I get that it appeared that way. Was being sarcastic... I'll go the remote coding route. I'll have other things to address at the same time, like a cluster swap and infotainment upgrade.

Dealer makes it hard to go the legit route.

I have a MK7.5 GSW S to which I would like to retrofit Driving Profiles. The BCM is 5Q0937087BA and the Gateway is 3Q0907530C. Scan shows "GW MQB High" as the description for the Gateway. In reading this thread, it seems that even if I were to buy the activation code that comes with 5G0054809...