Search results

Oh you mention a good point. Slightly bent clip on the grill or bracket on the bumper. I stared at it for 2 hours, I couldn’t pinpoint it

Driving me nuts. Passenger side of the grill keeps slowly slipping away from the bumper….i get the grill seated in place, bolt it down, and then it slides out. I don’t see anything that can be broken to cause this. Yes someone hit my car and broke the headlight (which I’m getting fixed soon)...

Thats what I’m wondering about too then. Are there LEDs for the DRL and is that another part I need to order, or are the LEDs part of the headlight assembly? If it’s another part, what’s the part number?

My DRL is not working, what parts do I need to change? Just the DRL module, or DRL module and other parts? Is that OSRAM bulb not part of the DRL?

If my DRL is not working, what part do I need to change? The DRL module 4G0907697G or part OSRAM 66340HBI OEM…or both?

That bolt comes out, it’s not captive. Does it need to fully come out, eh maybe idk, but I was able to get it out. What I did was also remove the bumper bolts along the bottom of the car (7 bolts) to create more wiggle room for the bumper itself. Then there was enough room for the passenger...

So I took off my cracked headlight and looked inside the DRL chamber and look what I found (see photo) - nvm I guess this isn’t the DRL chamber but the OSRAM HID bulb chamber, DRL module is actually underneath the headlight assembly and not in this chamber Why does my DRL module say OSRAM on...

My DRL is toast. Seems that the DRL module doesn’t come with the OEM headlight assembly and would be an added cost. For OSRAM, tbey include all modules and bulbs, I think.

If I buy the OEM 5GM941754A, does that assembly come with a DRL module and all the other bulbs? -DRL module apparently has a part number of 4G0-907-697-F, I think? -8K0941597E ballast -5N0941329 power module for cornering light -8N0953053 turn signal -N10320102 high beam -N10721805 low beam I...

Ya I took this off (see attached picture) and loosened the rear bolt and removed the side bolt and front two bolts. Must be wedged against the bumper

I must be wedged against the bumper then (I’m doing the partial bumper removal as opposed to taking off the whole bumper) There’s only one electrical connector and 7 bolts holding this thing in That rear bolt, the side of the bumper bolt, and then the two front ones as well as the 3 bolts for...

I’ve heard this rear bolt only needs to be loosened, not removed?

based on my vin I think I have the 4A one. I don’t know if the 2A will work on my car since u mentioned revisions. both options are available so I just need to figure out if that matters and go from there

Why am I seeing two original part numbers for the passenger side bixenon? 5GM941754A or 5GM941752A Which one?

So I can’t get aftermarket? Can I downgrade to halogen aftermarket or it’s not compatible at all? Because Goddamn, 1.2k for the passenger side Genuine bi xenon’s…

Hey I have a 2017 MK7 GTI SE with what I think are bixenon headlights. I need to buy a new set of aftermarket ones because the passenger side assembly cracked due to a hit and run. Which aftermarket headlight options make the most sense, ideally <$500? This topic confuses the heck out of me...

Is the rear most bolt on the passenger headlight assembly a captive one? See attached. I unscrew and unscrew and it never popped out so thought it might be captive?

Let's put aside what happened on my car for a second, I'm just asking what would happen if you were taking apart an intact bleeder valve: I'm asking this: if you were to take an intact bleeder valve off of a MK7 and remove the bleeder screw (metal) and plastic hex shaped thing by hand, would...

Let me ask it like this. what keeps the yellow restrictor in place? Does the top plastic hex keep it in place or is the yellow restrictor kept in place another way? Doesn’t the yellow restrictor sit in place on the right hand side of the valve, away from the plastic nut in the middle port?

Hey, I inspected the broken bleeder valve and noticed there was no yellow restrictor (see pic)??? Do you think that it not being there means it either broke or was removed or would you expect it to also get dislodged since threaded metal piece and the plastic hex piece popped out? Do those hold...