Search results

Yes

Or simply try resetting the complete settings

Yes you can update

Check coding and adaptation

Also When you using obd11 Goto 5f multimedia And goto long coding And check bit 24 voice control is activated If not simply activate it

Generate fec for voice and try injection with obd2 Follow the video carefully

press and hold menu button after that you will fec and swap function option and take pictures of installed codes from top to bottom and also take picture or supported codes from top to bottom

what do you mean by long start .? you been your radio is play after a delay .?

if your mib2 unit its written "HW:04xx , SW:04xx " then offcourse you can update to 480

questions for you. 1. can answer and speak from bluetooth from your radio.? do you actually have microphone in your car installed in dome light .? 2. did you check unsupported fec code list in your mib 2 .? 3. did this mib 2 unit came with factory or did you retrofit it.? 4.which patch did you...

problem can also be that you should patch the unit properly to activate fec

there is nothing like your mib cannot support voice unless if you dont have actual physical hardware like microphone in your domelight setup just try watching the video and activating the voice fec example 00070300 - VoiceControl (Online SDS with Nav) 00070200 - VoiceControl (SDS with Nav)...

try updating it and patching it and later check the all fecs are activated and it should work, if not try manually activating the fec and swap

By the way voice function is not so amazing like Siri or Alexa or any other voice assistant I only used it once to check that's working

If you don't have odb11 tool then you can, upgrade to 480t and patch it with below patch file You can choose cpoff version if you see Component Protection after upgrade If not then you can use without cpoff version patch If you have obd11 then you can also patch with toolbox...

Yes you can upgrade and install again toolbox and patch again

It's possible but 480 don't have any noticable changes and if your unit is 03xx then don't risk with updates

CP ERROR IS NORMAL ; DONT WORRY ABOUT IT CHECK THE LONG CODING FOR PARKASSIT