Search results

1. With this mod the rear fog lights won't turn on at all. 2. Coding: As long as your vehicle coding matches the middle column all you need to change are the green boxes. I recommend to double check the coding line by line.

Potato noise is a high speed (damper but not vehicle speed) check valve closing effect, and happens typically if they road has a certain input height with lower occurence. Sometimes we drive over grass to eliminate tire noises during evaluations. With a higher number of obsticales (coarse road...

"Feux de jour" is basically triggered as soon as the vehicle has ignition on. Since Leuchte4 doesn't "react" to it, there is potentially one more thing you could try: set Leuchte4TFL LB4-Lichtfunktion A 4 to "Klemme15..." instead.

There’s no smooth road ;-). Smooth looking roads can be the most challenging for comfort tuning.

Do you still have the old rear shocks? Or could you potentially swap your rear shocks with GTIfan99‘s shocks for a test? To my knowledge the Koni‘s are twintube shocks. The base valve has a check valve on the rebound side that opens and closes pretty freely by design. The piston rod volume gets...

I can see why. Years ago had the chance to drive a studded vs regular winter tire on an enclosed snow test track in Austria. Amazing, until there’s no snow… So far never had to use chains on a fwd car while going to the alps. I do a have a set of chains in the trunk just in case. Some roads in...

Regular winter tires. Studded tires aren’t allowed in Germany.

Because rattle can is all I can… my winter steelies turned from rusty to CSG.

Material is PE-HD. Used a jigsaw to cut it in shape, scissors for 45degree angles, sand paper and razor blade smooth them out.

Well, broke my cheapo front AE mud flap the other day leaving work. Made my own mud flaps out of a piece of structured thermoplast. Started with a template. Ready:

Locally over here in Germany. 380€ installed for the set.

My vote goes for the Eagle F1 Asymmetric 6. Second year on them and I couldn't be happier. Ran through different sound dampening before I got the Eagle F1s. My brand new snow tires are much louder... "2023 Tire Reviews Performance Tire Test - 3rd of 6 tires Positive - The Goodyear Eagle F1...

There is at least one hidden fuse under the front lugs. Worth to look into it.

Is it possible to have the same setup in side light (position light like the attached picture) for DRL light when rotary switch is in position 0 and AUTO? Try to set Leuchte2SL VLB10-Dimmwert AB 2 to 26. can you explain to me more precisely the good method to do this and to test wires...

I would check GND wire in Pin7, and wires Pin10 = BCM B10 / Pin12 = BCM B04 of "J860 Left Daytime Running Lamp and Position Lamp Control Module". Continuity check w/ multimeter might not be enough. If multiple strands of one wire are really broken I would use a 21w halogen bulb and 12V battery...

Thanks for the pics. Unfortunately it's not 100% clear how they are wired. In it's current state it would be a guesstimated coding list to create. If you receive the adapters please test which pin of the 14-pin connector is wired to which 10-pin. From there it's much easier to come up with the...

Unfortunately I can't open the link over here. Could you share some pics please? There is more coding to be done, but the coding needs to match the wiring. With the coding you tell the BCM which light function is physically connected to each light channel. IMO you have 2 options: 1. Re-pin your...

Good morning, 2 things to consider from my side: - AE 10 to 14 pin adapters are typically for Xenon/HID retrofits. You will need 14pin male to 10pin female instead. - At least the wire size for High beams is 1,5mm² on Halogen headlights while it is only 0,5mm² on Xenon headlights. The reason...

Check ebay.de. There you can get them w/ shipping to Greece for 450€ +15-20€ shipping from VW dealers

Brand new brake parts, nothing loose, except for a couple of millimeters vertical play of the brake pads. With the different back plate angle on OE parts the pad can't move vertical any more. That solved my issue on sharp pothole impacts (wheel accelerated up).