Search results

Bump for update, all finished

Perfect thanks, will update this thread when I get everything sorted out!

I don't have any front assist unfortunately, its a base S. I did find someone that does coding for this and will maybe just let them do it after I install all the parts 😅. Will compile the list of parts needed, I will have to use a MK7.5 Grille to fit the MRR flat radar since its the flat upper...

Update: Coding seems to be fairly involved and I paid a coder to do it, name is Doctor I think on the forums here. I went with a newer radar setup from a MK7.5 that mounts behind the badge, thus also requiring me to use a 7.5 upper grille. It will fit fairly secure however it will have some...

Any specific set you'd suggest fromt here? 😅

Can the revo tool also be used to press back in a OEM lower puck? I attempted to reinstall a oem one and you can get it mostly in, but some of the outer edge just can't seem to compress back in

Woops its for a GTI, editing orignal post

*SOLD*

I tried out the FRAM XG2807A, so far so good after a week but only street driving. It is twice the height of the original filter but clears the hood just fine.

Does the downpipe have the regular Cat or GESI one?

Willing to ship?

I've had my 17 since new sometimes use up some coolant, at 75k miles now. Still can't find any waterpump or reservoir leak anywhere.

Fronts, preferabbly the entire seat, heat shields lines etc.

If anyones lookin to offload a set of PP brakes for a good price, lmk!

Yes I installed the pro kit, preferred the cleaner look but either version will provide the same results. It'll make your spark plug changes a lot easier too hah

Update on my end of the vibrations. I recently put in the EQT grounding kit, after a couple days I can say it did take down the harshness a knotch, at times I don't notice it now. Still there but not as numbing, AC is on.

Ah I see, welp that's an eyesore. When the time comes for smog checks in California, even though the CEL was hidden I figured it would read as unready under the checks anyways. The initial reactions on FB seemed like they needed to jump ship just because of this hah.

Anything beyond stage 1 with EQT OTS should have thrown a CEL unless the defoulers worked (never had any luck). Doesn't change anything for us, Stage 2 we're already unplugging the rear O2 Sensor to prevent the CEL and over time Rich condition.

My arm looks fine n pretty straight, no contact that I can tell at least. Recently gapped plugs to 0.24 with rs7 plugs, although I've never had a rough idle on this car. I did look at my OBD11 to raise idle rpm, which for some reason the "Engine Idle RPM" option isn't there...so hoping it'll...

I've been expieriencing the same, after 500 miles, while better than the initial install, the vibration is pretty noticeable. 034 High Density Engine/Trans Mount and Stock Dogbone. I can clearly feel vibrations through my pedals and steering wheel, reverse rattles my keys. I barely had to move...