GOLFMK8
GOLFMK7
GOLFMK6
GOLFMKV

Search results

  1. lplim

    [resolved]

    This can be fixed with a camber plate. I went with EuroSport Camber pucks and it should even out front to rear fitment with a +35. I use 8.5 +35 or 9 +42 on my cars. Without a slight tuck from camber up front, you will rub when slammed. With this method, you wouldn't even need to roll your...
  2. lplim

    Aggressive wheel fitment thread/stance

    17x9 +43 -3.5 Camber 0 Spacers Coilovers + LCA
  3. lplim

    Audi TT (8S) Control Arms

    I wanted to quickly chime in here. Currently running the following setup: - TTS LCA - Mavotech Lower Ball Joints - KW V3 - Stock Top Mount with Eurosport Street Camber Insert After alignment, I was able to pull the following specs: The car handles phenomenal. Tire wear at the track is superb...
  4. lplim

    JB4 Logging, stacking and Map 6 Discussion

    Would anyone be able to provide assistance? https://datazap.me/u/lplim/as6spd75?log=0&data=1-4&fbclid=IwAR3oghRa9AfKKXP9c6Dg4ie4Qz7xLZ7HSzvoOxTwhB15nW9gRxA4qjyQhwU&fs=e&s=cl this is for a 6spd MK7.5 1500 0 2000 2 2500 3 3000 3 3500 3.5 4000 4.5 4500 5.5 5000 6.5 5500 6 6000 6 6500 4 7000 4...
  5. lplim

    ► Official APEX VW SM-10 Flow Formed Wheel Thread

    http://www.racetechnologies.com/sites/default/files/pdfs/1S4.8003A.pdf
  6. lplim

    ► Official APEX VW SM-10 Flow Formed Wheel Thread

    Hey Geirsen, Would a brembo GT with 345mm x 30 fit Apex 17x9 on MK7?
  7. lplim

    ► Official APEX VW SM-10 Flow Formed Wheel Thread

    Take 245/45/17 with a grain of salt. It only works on stock lower control arms. If you do SuperPro/TTS (which I’m using), you will need to have a high caster of 8 degrees and up (also, apparently not good) otherwise you will experience tons of rubbing close to bumper / fender bracket. I’ve used...
  8. lplim

    Aggressive wheel fitment thread/stance

    Also test fitted 17x9 SM10’s. Ordered 255/40/17 RT660’s which visually appear to be problematic - a tight squeeze between rear fender and fuel filler neck. It’s an expensive habit of mine to do fitment around wheels. 🤭
  9. lplim

    Aggressive wheel fitment thread/stance

    Finally updated my setup: 245/45/17 PS4S TE37SL KW V3 -3.5 Front Camber
  10. lplim

    Deciphering Intermittent Cruise Control Errors after Modifications

    Occasional Cruise Control Error is what I currently have.
  11. lplim

    Aggressive wheel fitment thread/stance

    Agreed. Lowering springs for this vehicle is just marketing bs. Absolutely 0 no springs ride well unless you go B6 / B8 / KY dampers and at that rate, might as well go B12/B16.
  12. lplim

    Deciphering Intermittent Cruise Control Errors after Modifications

    Hi all, It’s been a few months since I moved over from springs to coilovers and aggressive negative camber and I have been getting intermittent cruise control errors upon startup. They go away after another restart; I can’t seem to pull the codes from OBDEleven. I previously had a bunch of...
  13. lplim

    Aggressive wheel fitment thread/stance

    Previously on H&R Sport, Factory Dampers. Absolute trash of a ride. It is perfect! Recently moved over to V3’s. The ride is way better but a bit too soft for my liking in terms of body roll. Will test after winter.
  14. lplim

    Final decision with new wheels / tire combo. 235/45-17 vs 245/45-17

    FYI: - 17x8.5 +45 TE37SL - 245/45/17 PS4S - 2” Drop
  15. lplim

    ECM service campaign? Action Code 24FX

    Nope. Did the easy apps and reverted throttle response to stock. Issue hasn’t popped up as of yet. Will keep you all posted.
Top