Search results

Fwd or awd?

Just picked up a 2019 R. First "mod" was the spare and jack kit.

PM'd

My girl was totaled. Below is what's still in my garage/pulled off the wreck. Make me a reasonable offer. Buyer pays for anything to be shipped. I'll send pics upon request. OEM Downpipe - pick up only. Swapped out @~ 40k OEM Intercooler - pick up only. Swapped out @~ 40k Depo Helix Dynamic...

I have my OEM parts; Downpipe, Intercooler, Intake, 19"Cadiz (some curbing) that I hadn't considered putting up in here. I'm in Philly suburbs, if any of those are what you're looking for.

Has anyone figured out a solution to the loss of CC with the Audi Throttle mode on the Mk7 platform? I love the responsiveness, but I also love CC...

Any idea what the stock measurements should be? I think i recall reading f:355mm r:360mm...

I'm guessing so... But, why? Springs aren't that expensive. Seems like the labor would render it not worth it...

This is definitely what they look like. No racingline logo in site.

I purchased my 2015 R used, and in the owner's packet there is a certificate of of installation for VWR springs. Looking at the installed springs, they look OEM; standard black powder coat. Aren't VWR springs typically powder coated blue? is there a way to tell if they are VWR? I have gotten a...

$40 shipped. Not bent or warped at all. Very light nicks from install.

Good tip, thanks!

Now that I've installed the IE DP, there's way too much drone at 3k RPM without the resonator. Especially under heavy acceleration. It literally startled me the first time I stomped on it... "Holy S@#$ that's loud!!" Unfortunately, as a I bought my car used, the original resonator had already...

That's... ugh. Any chance I won't "ruin the party" if I try using silicone grease and pushing it into place with a floor jack?

I was installing an IE downpipe. You have to detach the dog bone to rock the engine forward to disconnect the drive shaft to fit the catalyst out. When reassembling, i thought i had the engine back in place and had hand tightened the bolt before hitting it with the impact. It wasn't lined up or...

So I cross threaded my front subframe bushing bolt and now can't get it fully torqued down. It's in tight enough to be drivable, but i'm completely avoiding boost/spirited driving. I have replacements coming and I understand the lower bushing gets removed by cutting out the urethane with a...

Thanks all, i got it off with a little pb blaster (i was really hesitant to have any residue potentially igniting), and a little help from a pry bar.

I've got all three of the drive shaft bolts out. Both of the dogbone bolts are out. I've rocked the engine forward as far as I can, and the shaft is not breaking free. I gave the shaft a few good hits with a rubber mallet. I'm not sure if I should be spraying PB Blaster on it, but that'd be my...

FS:Racingline R600 (no SAI) + Coolant Underhose Kit - $325 ~7000 miles on the intake. Coolant hose never installed. $325 + shipping, or local pick up in the Philly area. https://imgur.com/DoHglcH https://imgur.com/HILDROW

I upgraded my tail lights to the Euro-style, pre-facelift LEDs, following the very popular ShopDAP tutorial. However, I prefer the look of the outer lights only as the brake indicators. Anyone know the coding to "undo" the default 5 light mod? Sent from my Pixel 3 using Tapatalk