Search results

i know their is polybush and superpro i just want to get genuine bushes as trying to diagnose knocking at the rear since lowering my car i am trying cheapest stuff first then it will be on to the arms which will cost a fortune just trying to knock this on the head as cheaply as possible .

Hi need a bit of help again , is it possible to get genuine or after market bushes for rear multilink suspension ?

It happened to me during last winter , I just put it down to cold weather . It's quite dangerous though as I have been moving from a stop at red lights etc . Thankfully drivers behind me have been switched on . I briefly researched the problem and only thing I seem to find is the loom going from...

scotland not uk 😊

so maybe reiger or similar

what a good answer , thankyou.

I'm guessing its american

can anyone give me part number for this front bumper

cheers Dave 👌

is this possible without concern ?

is it possible ? I look on Ebay but see so many variants . Clamps after back box and full cat back , do I have to cut my exhaust to make pre 17 fit ?

all the old bolts went back in could someone tell me how I can get the part numbers for the bolts

it is sitting level , I wish it was just a few mm lower at the front but beggars can't be chooses 😊

a bit of a bugger with delivery and the word assuming , got all the hard ware and shocks bar the rear shocks (delivery 19/8/22) they sent shocks with 55mm but didn't notice until fitment day . so everything had to be undone then stock refitted , was a sad day. So as if by magic got what I needed...

ordered all this from demon tweaks and my rear shocks which I ordered first ain't arriving until august (was going to do a bit at a time but karma got the better of me ) so looks like I'm not fitting all this until next year . guess gives me more time to buy new torsion to yield bolts and new...

bilstein b6 , sorry .

Thankyou Dave the part number for these are - 5G4071677E . I have ended up getting the H&R lowering springs 30mm and 25mm( just slightly cheaper than vw oem ones) and bilstein b8s . Thankyou all for your help.

Hi they will just be standard hubs , I guess it will just be easier to buy after market springs and shocks . I just really don't want to lower that much it's a daily run about . Maybe h&r springs with koni shocks I think the minimum they do is 25mm on rear 30mm front . But thanks for heads up on...

anyone :)

Hi , I'm just looking for a bit of help I am thinking of buying stock gtd springs and shock absorbers for my 7.5 2.0 tdi . would this be possible ? Many thanks .