GOLFMK8
GOLFMK7
GOLFMK6
GOLFMKV

Search results

  1. A

    Footwell Lighting Troubleshooting

    Ok, thanks. What to do if I have no settings starting with"Interior lighting; parameter ..." in adaptations? Just try recheck and config all others?
  2. A

    Footwell Lighting Troubleshooting

    Hey! Mine is working fine, the only issue that I can't make the setting Footwell light appear under Lights menu on MMI.
  3. A

    Footwell Lighting Troubleshooting

    But as far as I understand these parameters are available on a newer model year cars as I don't see these settings in adaptation via VCDS (or maybe I need updated VCDS interface - HEX V2 or Hex-Net.). And for now footwell lights work well, except that I have no menu "Footwell lights"under...
  4. A

    Kufatec footwell lights coding

    Hey! I’ve installed foot well lightning in my Golf S 2015 and it works as expected, but I can’t see the % setting under “Lights” menu in my MIB2 system. I have the opportunity to change the intensity only with cluster brightness slider. As far as I understand the setting in adaptation which...
  5. A

    Footwell Lighting Troubleshooting

    Hey! I've installed LED footwell lights into my Golf 2015 (BCM ver. 5Q0 937 087 M). But I have an issue with accessing to Ambient Lightning menu on my MIB. It says "This function is currently not available". Made coding and adaptations according to @Bäsemödel post here...
  6. A

    Anyone fitted a highline reversing camera?

    Yes, sure will collect all info together and post here later.
  7. A

    Anyone fitted a highline reversing camera?

    Yes, you're absolutely right, calibration absence doesn't affect driving, but it's not difficult operation as I've read before and I'd like to try.
  8. A

    Anyone fitted a highline reversing camera?

    UPDATE: Straight after camera/emblem and wires connected the camera will not pop out w/o its coding. So after installation we have to parameterize it (if that wasn't done before) and then during coding of 6C module (RVC) we choose that camera is located inside the flipping emblem. For now the...
  9. A

    Anyone fitted a highline reversing camera?

    Hi! Yes, you're right if we are talking about lowline camera (not connected to CAN bus and hasn't its own control module). I've installed 5Q0980556B camera into flipping emblem instead of standard camera module w/o active lines. I bought it as new so it has no parameterization from factory and...
  10. A

    Anyone fitted a highline reversing camera?

    I have ODIS-E for that and going to parameterrize it. Does camera's parameterezation affect the mechanism of opening of emblem? If I'm not mistaking it affects only video aspects. Am I wrong?
  11. A

    Anyone fitted a highline reversing camera?

    Hey, everyone! I've installed the highline RVC on my Golf 7 2015 and have a question. What actions should be done to start emblem flipping and begin camera going out when reverse gear activated? The camera was new and non-paramaterized, I know that it should before I receive the picture on...
  12. A

    Anyone fitted a highline reversing camera?

    Hey, everyone! Does anyone have parameterization XML file from Passat B8 for using in ODIS Engineer for highline rearview camera 5Q0980556B? Thanks in advance.
  13. A

    Crankshaft for Golf 1.8L 06K105101F needed.

    Hey all! I'm looking for crankshaft for 2015 Golf 1.8L CXBA Gen 3 engine (OEM part number 06K105101F). Has someone for sell? Thanks in advance.
Top