dtfd
Autocross Champion
- Location
- Massachusetts
- Car(s)
- MK7.5 GTI
what kind of 3-d printer are you using?
what kind of 3-d printer are you using?
Prusa Mini and I printed it in PETG but I have a spool of ASA on the way. Printed at 100% infill for rigidity. It's fantasticwhat kind of 3-d printer are you using?
Oh I'm not really nervous. I'm super super super excited, actually. And I'm doing the class the day before. But I like to joke because I know it will be hilariously chaotic.I got you, man. I should be doing the novice walk through and I'll help you get going. Don't be nervous, just have fun. I've been autocrossing and tracking for decades and I'm still mediocre. No one cares. Just have fun.
Oh I'm not really nervous. I'm super super super excited, actually. And I'm doing the class the day before. But I like to joke because I know it will be hilariously chaotic.
A+ on the coolness factor, but looks like a more complex pro-clips setup.Finally. Found, printed and Installed my ideal cobb AP mount!
Link to Mount STL File
Printed with Prusament PETG on the Prusa Mini. 100% infill for rigidity. I used strategically placed zip ties to hold it on because I wasn't able to get any tapes to stick to the PETG. Took 2 hours and 30 minutes. No supports. 5mm brim to make sure it stuck to the build plate. Using a Scosche Magicmount Magnetic dash mount to hold the Accessport. Have yet to run the wire. I plan on running it through the vent that this clips too. I will be reprinting this using ASA to make sure it doesn't warp during the summer or while cranking the heat during the winter
Blocks that vent though, no?Finally. Found, printed and Installed my ideal cobb AP mount!
Link to Mount STL File
Printed with Prusament PETG on the Prusa Mini. 100% infill for rigidity. I used strategically placed zip ties to hold it on because I wasn't able to get any tapes to stick to the PETG. Took 2 hours and 30 minutes. No supports. 5mm brim to make sure it stuck to the build plate. Using a Scosche Magicmount Magnetic dash mount to hold the Accessport. Have yet to run the wire. I plan on running it through the vent that this clips too. I will be reprinting this using ASA to make sure it doesn't warp during the summer or while cranking the heat during the winter
I have to first map out the E stations to make sure I can make it there and back. I'm interested to see what these things are capable of in some turns.@904mk7 I might bribe you to be my navigator since this will be my first AutoX event LOL
Blocks that vent though, no?
I made do with the fronts. I'm a little concerned with the rears because there's just no room to do much of a turn with a breaker bar or torque wrench. TBD. Maybe it's one of those things that will work better once I actually get in there and do it.
stock dcc suspension, stock springs/struts. riding high in the sky, until i put these vwrs on .What suspension?