Oh, that is weird because the PDF that it came with had, i quote :
"10 Park assist: Long Coding ->byte2 > BIT4-5 - 10 Camera type: rear view camera (RVC) instaled"
I only knew that you dont enable the (lowline camera in 5F)
The camera is Parametrizied. it does not have "00000000"
Basicaly here is what i´ve connected the camera. With VCDS 1. Added camera in Can Gateway instalation list.
2 .6C Module apeared ( I can do output tests) It wont let me change anything in long coding.
3. 10 Park assist changed long coding to RVC instaled.
4. Adaptations 5F ....BAP_VPS activated
....BAP_VPS_MSG_BUS Databus infotaiment
5. Restarted the radio
"10 Park assist: Long Coding ->byte2 > BIT4-5 - 10 Camera type: rear view camera (RVC) instaled"
I only knew that you dont enable the (lowline camera in 5F)
The camera is Parametrizied. it does not have "00000000"
Basicaly here is what i´ve connected the camera. With VCDS 1. Added camera in Can Gateway instalation list.
2 .6C Module apeared ( I can do output tests) It wont let me change anything in long coding.
3. 10 Park assist changed long coding to RVC instaled.
4. Adaptations 5F ....BAP_VPS activated
....BAP_VPS_MSG_BUS Databus infotaiment
5. Restarted the radio