What did you do to your MK6 today?

[KollinWithaK]

Full exhaust going on today. Maybe stage 2 retune? Will depend on what time I can get back to the office.
Then getting small paint correction and ceramic coated tomorrow.
Then interior swap next Wednesday and some small headunit changes.
So much going on lol

 

[torga]

Full exhaust going on today. Maybe stage 2 retune? Will depend on what time I can get back to the office.
Then getting small paint correction and ceramic coated tomorrow.
Then interior swap next Wednesday and some small headunit changes.
So much going on lol

Paint correction already??

Gotta get all your money back.

 

[jay745]

I made my own unibrace spacer kit since I bought the ecs trailing arm brace and it conflicts with the UB I already have. Unibrace sells these for $45, made my own for around $6

 

[KollinWithaK]

Paint correction already??

Gotta get all your money back.

I mean i've been driving it for the last month. paint doesn't come out perfectly, even from factory haha.
plus i want it to be as smooth/clean as possible before sealing it up with ceramic.

 

[Phur]

I mean i've been driving it for the last month. paint doesn't come out perfectly, even from factory haha.
plus i want it to be as smooth/clean as possible before sealing it up with ceramic.

So... wet sanding?

 

[brat_burner]

I managed to snake out my rear washer nozzle with just removing the 3rd brake light. I got the new one in there but I can't get the nozzle end clipped back into the spoiler. FML bout to trade it in

 

[uglybastard]

I managed to snake out my rear washer nozzle with just removing the 3rd brake light. I got the new one in there but I can't get the nozzle end clipped back into the spoiler. FML bout to trade it in

Pull the hatch trim and find the thing through one of the holes?

I been trying to get mine squared away. All I can confirm so far is that the guy who removed this previously just cut the line. Marvelous.

 

[brat_burner]

Pull the hatch trim and find the thing through one of the holes?

I been trying to get mine squared away. All I can confirm so far is that the guy who removed this previously just cut the line. Marvelous.

The trim has been off for days, I couldn't see anything in there. I only found one vid of spoiler removal and they broke it lol. There's like some type of plastic reinforcement underneath there.

That sucks.

 

[uglybastard]

The trim has been off for days, I couldn't see anything in there. I only found one vid of spoiler removal and they broke it lol. There's like some type of plastic reinforcement underneath there.

That sucks.

https://www.ebay.com/itm/10-12-VOLK...-/203246477159?_trksid=p2349624.m46890.l49286

Looking here, and at another pic of the inside of things I saw last week, where the 3rd brake light has the connector, its mounted there somehow. I'm thinking that those can be removed or undone somehow to make the job easier.

 

[Vic_MKVI]

Oil change before the weekend!!

 

[Joe_Mama]

@jay745 can you still get air temp cooling effects from 4 direct injected nozzles into the runners or do I really need that 5th nozzle pre TB

 

[butthead123]

Swapped coolant bottle and installed ECS mk7 plaid tow strap. Also noticed possible RMS leak during exhaust gasket replacement. Smh.

If you have a DSG, check the DSG filter housing as the oil filter O ring can fail and can leak down that same area

 

[jay745]

@jay745 can you still get air temp cooling effects from 4 direct injected nozzles into the runners or do I really need that 5th nozzle pre TB

Yes, it just won't register it with the car because it's after the iat sensor

 

[jay745]

Fluid changes today

 

[kalani619]

First post on the forums. Bought my mk6 on March 1st and I couldn’t be happier. Within the first week I got an accessport.
Finally decided to change the gear oil yesterday.