@dvw-r
I tried to activate everything as per your suggestion but they don't work ...
I checked the power again and there is.
at this point I hope I have the wrong pin in the bcm ... I will try to disassemble it and check that it is in pin 29 of connector C.
@dvw-r
yes i got a complete chinese kit.
consider that the cables and connectors are all OEM ... only the strips that light up are Chinese.
I'll put you the link.
https://it.aliexpress.com/item/1005001488738032.html?spm=a2g0s.9042311.0.0.7b7b4c4dcxY0f3
must the positive be connected to fuse...
Thank you very much. @dvw-r
Unfortunately, however, despite the encodings of my BCM seem correct, the 5 lights (4 doors + glove compartment) did not work.
I am attaching the exchange of the adaptations of my BCM ... maybe you see what is wrong.
Consider that I made the OEM connections, so...
update.
I made all the connections to have the lights in the doors in OEM mode.
I then connected to the BCM and sent the wiring to the 4 doors and to the passenger glove box.
the colleagues were these:
red wire: power supply under 10 amp fuse
black wire: ground
purple / white wire (in my...
for now I have only replaced the BCM but I still have to finish all the adaptations.
the light kit should arrive this week ... then on weekends I start working on it a little at a time.
@IWMTom you confirm that to control everything from the radio the connections are these:
BROWN CABLE TO...
actually, I'm not done with the adaptations yet.
I activated the ambient lights menu and I have the 30 colors working, but I have problems with the fog lights and foot lights.
I have to work on it a little longer but the guy who helps me with this doesn't often have time.
when everything is...
@IWMTom have you already started doing the work and the various connections?
for now I have only made the change of the bcm and I'm waiting for the material to arrive.