What did you get in the mail or bring home for your MKVII today?

[StorableComa]

 

[Acadia18]

Also note, if you're using EQT's default log list, it doesn't have Rail Pressure Set Point on the list, so you'll have to add it yourself if you want to watch that.

 

[StorableComa]

Where’s the “join the dark side” meme when you need it

 

[Acadia18]

 

[StorableComa]

View attachment 236318

 

[Desslok]

That's the same face I made when I saw this:

 

[JJ_MK7]

I did added the additional log point this morning and did a pulled. Need to check the data tonight

 

[ckuhns]

Got a Schroth Quick Fit Pro and FHR Super Sport XLT. Gotta get the belts installed this evening for tomorrow’s track day at Laguna!

 

[Daks]

That's the same face I made when I saw this:

View attachment 236319

The amount of bad decisions I've made, continue to make and will make because of ass is unbelievable. It's my kryptonite.

 

[Acadia18]

The amount of bad decisions I've made, continue to make and will make because of ass is unbelievable. It's my kryptonite.

@Daks be like

 

[swcrow]

The amount of bad decisions I've made, continue to make and will make because of ass is unbelievable. It's my kryptonite.

Don’t ever get stationed in Korea…ever

 

[JJ_MK7]

Diggs pretty much laid it out, but just in case people want to see it (I'm a visual learner and need things explained like I'm a toddler...)

This is what you want to see

https://datazap.me/u/acadia18/sneeky-v5-3rd-gear-pull-log-1-10422?log=0&data=33-34

View attachment 236315

The set point is calling for 3400psi, and the rail pressure pretty much follows that perfectly. That's good

This is what you don't want to see

https://datazap.me/u/acadia18/sneeky-v4-3rd-gear-pull-log-1-112721?log=0&data=35-36

View attachment 236316

The set point is calling for 3333psi, and the rail pressure starts there, but then drops to 2300 when the boost actually builds up. That's bad

Your chart is so linear Acadia, mine is a big mess. Perhaps I'm not the best "Logger" but at least is showing rail pressure following set point as expected

https://datazap.me/u/jjmk75/autotech-hpfp-updatepulled-1?log=0&data=34-35

 

[Acadia18]

Mine are more linear because my logs are usually more linear in nature. 3rd gear, from like 2k rpms through 7k rpms, then into 4th gear once the DSG shifts automatically.

The important part like you said, is your rail pressure is following what the car is requesting, going up to 3500psi. When I was having pressure issues, mine could barely go above 3000psi on low boost.

 

[Daks]

Don’t ever get stationed in Korea…ever

I would have thought you'd say Brazil, Columbia, Ukraine, but Korea... Really?

 

[helushune]

Installed the period correct 8" entertainment display last night. They should have come from the factory with these installed.