TheMechanicDude
Drag Racing Champion
- Location
- Fl
- Car(s)
- 17 GTI Sport
Thanks. Gonna add some more 93 in my 2019 -2 lol
Maybe add some more IC .Thanks. Gonna add some more 93 in my 2019 -2 lol
I did my 40K service on Saturday. I ran a code scan before starting, and found one "fuel rail pressure too low" code thrown back in June. I believe that was when I was running e30 for a tank. My FOL is currently set at 55 and I am using pump 93. If I run e30 again, should I set FOL to 60?
Did you also raise the boost back in June? It won't really hurt anything if you just left it at 60 and just forget about it.
Yes. I'll set it to 60. The plan is to run Map 3 with pump 93 and Map 6 with E30 until a) it cools down or b) I install an intercooler.
Thanks
You could just make a 93 map 6 and a E30 map 6. Just save them and recall when needed. No need to live the shelf map life after you're comfortable with Map 6.
screen shot it on your phone a save it, its only a min to input and update the values on the BT.I don't know how to do that. I do not have a data cable, BT only.
screen shot it on your phone a save it, its only a min to input and update the values on the BT.
I call that "chasing Map 6", which I'm not willing to do. If I could load different Map 6 files, I'd do that, but I don't think it's possible. Thanks.
It absolutely IS possible and what I did many times. Last count I had about 7 saved Map 6s. Super simple on BT too really, just change your boost targets and save/name the file. Then when you are on Map 6, you can choose the file you want to run. It will stay on that file until you change it. Easy peasy.