GOLFMK8
GOLFMK7
GOLFMK6
GOLFMKV

Anyone fitted a highline reversing camera?

Arad_20

New member
Location
USA
Figured it out!

When fitting the highline RVC, don't tell 5F it has an RVC in byte 19 - instead, go into adaptations and mark "BAP VPS" as activated, and "BAP VPS msg bus" as "comfort data bus".

I now have all the modes I'm supposed to have.

If anyone has any questions regarding fitting a highline RVC to the Mk7, hit me up!

By BAP_VPS you mean what I Marked In The Pic? And if so, why is it on databus infotainment if i do not have a reverse camera?
 

Attachments

  • 20180923_231310.jpg
    20180923_231310.jpg
    457.6 KB · Views: 1,560

IWMTom

Autocross Newbie
To summarize...
installation is the same as this pdf
https://carsystems.home.pl/instrukcje/golf7rvcde.pdf

Two Wires to the headunit, 6 and 12
A Wire for constant 12v

Coding: as the pdf but don't tell 5F it has an RVC in byte 19 - instead, go into adaptations and mark "BAP VPS" as activated, and "BAP VPS msg bus" as "comfort data bus"

am i right?

Four wires to the HU - you forgot about the CAN HIGH and CAN LOW wires.

Everything else is correct.
 

Reaper1

Go Kart Newbie
Location
.
So, did the AliExpress wiring harness work with Highline camera?

Sent from my SM-N950F using Tapatalk
I am waiting for the camera, harness is in the car. When i get the camera ill update you guys.

Sent from my SM-G955F using Tapatalk
 

Reaper1

Go Kart Newbie
Location
.
To summarize...
installation is the same as this pdf
https://carsystems.home.pl/instrukcje/golf7rvcde.pdf

Two Wires to the headunit, 6 and 12
A Wire for constant 12v

Coding: as the pdf but don't tell 5F it has an RVC in byte 19 - instead, go into adaptations and mark "BAP VPS" as activated, and "BAP VPS msg bus" as "comfort data bus"

am i right?
If Instead of enabling the BAP VPS i will just do the coding for the lowline, will it still work bit i will not have the highline modes?

Sent from my SM-G955F using Tapatalk
 
Top