X2.Best post in entire thread.
Sent from my Pixel 2 XL using Tapatalk
Sent from my SM-G950U using Tapatalk
X2.Best post in entire thread.
Sent from my Pixel 2 XL using Tapatalk
Question for you: Do you have a late 2017 model or 2015-mid 2017?
Today I noticed a little blemish with the wiring #4713 I published a couple of days ago. I used Leuchte21 for Parking lights, unfortunately every time you hit the brakes w/o Parking lights on they flicker like a quick wink. If you code the Parking lights also as Day Time Running lights it doesn’t matter.
I came up with a slightly different solution #4715 and use Leuchte21 now to power the LCM modules. I double checked the results and couldn’t find any issues.
Today I noticed a little blemish with the wiring #4713 I published a couple of days ago. I used Leuchte21 for Parking lights, unfortunately every time you hit the brakes w/o Parking lights on they flicker like a quick wink. If you code the Parking lights also as Day Time Running lights it doesn’t matter.
I came up with a slightly different solution #4715 and use Leuchte21 now to power the LCM modules. I double checked the results and couldn’t find any issues.
Sent from my iPhone using Tapatalk
The factory uses C6 channel to power up the modules adapted klemme 30G.
I use Nano MQS:You got PNs for those 2 and 3 pin connectors?
Do you consider late 2017+ facelift models?Indeed it is C6 (running factory wiring setup) and using terminal 15 for powering the dynamic signal but late 2017+ uses the same wiring BUT has an official way to power it which is what I am talking about.
Do you consider late 2017+ facelift models?