I am thinking about getting h and r sport springs which supposedly lower the car around 1.3 inches do i need to get wheel spacers or an alignment done or anything or would it be good if i just got the springs
Tornado red|mk7 gti| 6MT
alignment after 50 miles
I am thinking about getting h and r sport springs which supposedly lower the car around 1.3 inches do i need to get wheel spacers or an alignment done or anything or would it be good if i just got the springs
Tornado red|mk7 gti| 6MT
Won't be a problem. I'm about to buy 18x8.5 right now. I plan on using the stock Pirllei tires for time being. I'm lowered on DG.Since this thread was already started. Can anyone tell me how if a 18x8.5 et 38 would fit ok? My concern would be the front. Lowered on VWR springs currently and don't want to do any fender pulling etc. Probably a 235/35 tire. maybe 235/40
Won't be a problem. I'm about to buy 18x8.5 right now. I plan on using the stock Pirllei tires for time being. I'm lowered on DG.
Worse ..... ET35So you'll be running that offset? ET38?
I believe ET35 is 5mm more than it needs to be. But I'm only lowered 1" with DG. So suspension travel to the fender shouldn't be an issue. PLUS I'm running 225/40 for now until I decide to go wider.Yeah guys, 8.5 with a 235 tire will struggle to fit anything bellow ET40 in the front fenders without some camber, pulling or rubbing. Rears will be fine though.
I believe ET35 is 5mm more than it needs to be. But I'm only lowered 1" with DG. So suspension travel to the fender shouldn't be an issue. PLUS I'm running 225/40 for now until I decide to go wider.
the CB is like 73. Could use hub rings?