Parking Brake Lever Trim, Removing
and Installing
Special tools and workshop equipment required
♦ Trim Removal Wedge - 3409-
Removing
– Unclip the front parking brake lever trim -1- -arrow-. (arrow is at front (most forward) of brake)
– Set the parking brake. – Roll the parking brake lever trim -1- on the parking brake lever
-2- up and over the handle.
– Carefully unclip and remove the parking brake lever trim -1-
on the handle -arrow- using the Trim Removal Wedge - 3409- .
Installing
– Pull the parking brake lever trim -1- over the handle.
– Insert the parking brake lever trim -1- into the groove
-arrow A- in the handle.
– Insert the parking brake lever trim -1- into the center console
and clip it in the front -arrow B-.