Which shifter bracket bushings fit the 5 Speed?

Hello everyone,

After many days of Google and forum searching I'm at a loss. The only ones I've found that work for the 5 speed seem to be the ones from 034 Motorsport. To me though, they look identical to the ones from CTS, which are only for the 6 speed apparently.

Anyone care to shed some light on this? Thanks!

https://store.034motorsport.com/034...ket-bushing-kit-for-manual-transmissions.html

http://www.ctsturbo.com/cart/products/Shifter_Bracket_Bushing-4482-695.html

I thought the rectangular ones worked for our shifter. I really have no idea and am also very curious.

The square ones are the end link bushings if I'm not mistaken. http://www.ctsturbo.com/cart/produc...hing_set_MK5_MK6_MK7_8P_8V_2008-4898-695.html

Does anyone make a metal bracket for the 5mt? I haven't looked at a side by side but I can't imagine they are thaaaat different. I assumed the bushings themselves were interchangeable but maybe that isn't true.

And yes I do believe the round bushings are for the bracket and the squarish ones are for the endlinks.

I know SK VeeDubR sources them. He also makes a short shift that I ordered. Maybe I'll just order them let everyone know how it works out.

Ok so here's the deal.

The round (circular) bushings for the side to side will not fit UNLESS you have the metal bracket. There's a little plastic nub at the end and you cannot slide the bushing over without filing it off. The square front to back bushing popped in no problem.

However, I think there is a way to get the bushing to work if you have the plastic relay lever. I think it would be the same procedure with the 42DD bushings as with the 6-Speed, which includes some drilling etc.

I didn't try the bushings for the bracket itself. Didn't have time that day. Plus it looked like a pain to get to lol