I was trying to find a connector manufacturer who makes a female? connector shell for the boost sensor (plug D on JB1/4), and just as I was about to ask people with piggybacks to see if there were any markings on their shells that show or might help find the manufacturer, George Smooth sent me a PM saying an O2 sensor extension cable has the same connectors, and should work. I'm going to order two, and since they're 40-inches long they should make it possible to unplug your tune easily from under the hood for warranty work. Just plug the ends into each other to complete the circuit. Just make sure the problem isn't with the cables or your boost sensor. But that's up to you if you want to buy a VCDS.
George originally found another supplier (OBD Innovations) who is cheaper, but I'm having so much trouble communicating with them (no phone number, and days to get a reply by email) I'm going with USP Motorsports, who George also thought might have them.
https://www.uspmotorsports.com/Exhaust/Sensors/Secondary-Oxygen-Sensor-Extension-Harness.html
Here's the other supplier: http://www.obdinnovations.com/o2-ox...nsion-harness-for-vw-audi-golf-mk7-passat-40/
I'm going to make sure the wires are on the right pins by using an ohmmeter (1 to 1, 2 to 2, etc.) before installing them, I suggest you do the same. And put your car to sleep first.
George originally found another supplier (OBD Innovations) who is cheaper, but I'm having so much trouble communicating with them (no phone number, and days to get a reply by email) I'm going with USP Motorsports, who George also thought might have them.
https://www.uspmotorsports.com/Exhaust/Sensors/Secondary-Oxygen-Sensor-Extension-Harness.html
Here's the other supplier: http://www.obdinnovations.com/o2-ox...nsion-harness-for-vw-audi-golf-mk7-passat-40/
I'm going to make sure the wires are on the right pins by using an ohmmeter (1 to 1, 2 to 2, etc.) before installing them, I suggest you do the same. And put your car to sleep first.
Last edited: