Wiring from fuse panel

Reaper1

Go Kart Newbie

Location

.

• Feb 3, 2018

• #1

im about to install my park assist kit and the only problem is power for the module, i know i need to connect it to fuse 32 but how do i get behind the fuse panel, i removed many trim pieces just to try and reach there but i cant, is there a special way?

 

A

athos56

Ready to race!

Location

Moxee

• Feb 3, 2018

• #2

Can you use a fuse tap? It has a header that fits into the fuse slot that lets you keep the fuse and run a wire.

 

N

Navi

Autocross Champion

Location

BK/NYC/Hamptons

• Feb 3, 2018

• #3

definitely use a fuse tap/add a circuit. I've been running two cheap "add a circuits" from amazon for a year for two dash cameras and have not had problems powering them this way.

 

Reaper1

Go Kart Newbie

Location

.

• Feb 3, 2018

• #4

i did order some fuse taps but it will take some time for them to arrive, the wire for power came with a connector especially for the fuse blade, but will fuse tap work the same?

 

P

pixlgeek

Passed Driver's Ed

Location

Houston, TX

• Feb 27, 2018

• #5

The proper way to do this is to use the included connection into the back of the fuse box.

 

Reaper1

Go Kart Newbie

Location

.

• Feb 27, 2018

• #6

pixl said:

The proper way to do this is to use the included connection into the back of the fuse box.

Click to expand...

yea but its just too much work just to get it back there, and from some reason the fuse slot i need already has a wire there so i have to use a fuse tap

Sent from my SM-G955F using Tapatalk